Description: The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. The Mechanical Application Engineer plays a critical role within the Engineering Chain Division and is responsible for providing the technical support necessary to correctly select and apply the appropriate products to achieve reliable success for both the customer and the company. The position will proactively engage and collaborate with inside and outside sales, product management, design engineering, manufacturing, and the customer. In addition to technical product support, the position is also responsible for product cost estimating. This requires a sound analytical mindset with strong attention to detail as quotation accuracy ultimately impacts the overall competitiveness and performance of the division. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description – other tasks may be assigned and expected to be performed. Product Cost Estimating and Application Assistance: • Generates cost estimates utilizing internal quotation program as well as “from-scratch” cost estimates. • Effectively communicates engineering/technical requirements to both internal and external customers. • Follows the corporate design manual in specifying chains, sprockets, and conveyor chain accessories to meet customer requirements. • Uses engineering principles in coordination with or in the absence of established standards. • Provides advice and technical support relative to product design to internal and external sales representatives, product management, quality, and manufacturing. • Cross checks estimates and proposals of other engineers. Product Analysis: • Completes Returned Goods Analyses (RGAs) and Corrective Actions in a timely fashion as assigned. • Analyzes worn and/or broken chains for wear. Determines modes and methods of failure and offers suggestions for chain and system changes and improvements based on company design guidelines. • Prepares and reviews customer and internally focused reports covering findings of RGAs including suggestions for improvements and systems changes. • Investigates alternate designs and/or processes for continuous improvement (value analysis) resulting in added value to the product, long term quality improvements and/or cost reductions. • Analyzes and evaluates new technologies to design new products or to improve existing designs. • Conducts product testing for competitive analysis. • Establishes design specifications for specific customer requirements. • At times, may travel to customer locations to trouble shoot systems and conveyor chain issues. Requirements: • Bachelor's degree (BS) in Mechanical Engineering (or Technology), with 2 years of related experience or Associate's Degree with 6-10 years of related experience. • Strong mechanical aptitude with a problem-solving mindset. • Ability to apply principles of logic, engineering, and/or scientific thinking to a wide range of intellectual and practical problems. • Excellent mathematical and reasoning skills with ability to apply advanced mathematical concepts such as exponents, logarithms, algebraic equations, and statistical concepts. • Strong ability to perform cost analysis, mechanical system analysis, variance reports, test sampling, correlations, etc. • Accurate measurement skills. • The ability to read and understand technical drawings. • Proficiency in computer software such as Word, Excel, Power Point, QAD and file management. • Minimal travel up to once per quarter may be required. Learn more about U.S. Tsubaki at: www.ustsubaki.com/careers U.S. Tsubaki offers a competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21
See More Details >>Job Title: Applications Engineer SUMMARY We are looking for a Mechanical Engineer that is interested in more end user interaction. This position serves as the technical authority for a specialized product line, providing engineering expertise to support sales and project development efforts across the organization. ESSENTIAL DUTIES AND RESPONSIBILITIES • Focus on sales support and evaluation of new business opportunities • Provide technical support across departments for the company’s product line • Review customer inquiries (RFQs) and determine suitable company products to meet application requirements • Collaborate with customers to develop tailored solutions and help close sales opportunities • Prepare cost estimates for custom or non-standard products • Perform engineering calculations related to product performance and sizing • Create and follow up on quotations as assigned • Support engineering and production teams in the design, build, testing, and installation of final products • Perform other related duties as assigned QUALIFICATIONS • Strong industry knowledge of product applications, engineering design, and applicable standards • Understanding of manufacturing processes relevant to product cost estimation • Ability to perform fundamental calculations related to mechanical design • Proficient in CAD software (AutoCAD/SolidWorks) to create layouts and proposal drawings • Basic understanding of electrical control systems • Excellent interpersonal skills for effective communication with customers and internal teams • Strong verbal and written communication skills EDUCATION and/or EXPERIENCE Bachelor of Science in Engineering (preferably Mechanical Engineering) with a minimum of 7 years of related experience. Equivalent work experience may be considered in lieu of formal education. COMPUTER SKILLS • Proficient in CAD software (AutoCAD/SolidWorks) • Familiar with Microsoft Office Suite • Capable of working within ERP and CRM systems • Strong typing and general computer skills WORK ENVIRONMENT • Professional, temperature-controlled office environment within a manufacturing facility • Frequent interaction with shop floor personnel • Occasional visits to customer sites to assess applications or inspect installed systems • Exposure to mechanical equipment and standard industrial noise levels (hearing protection not typically required) TRAVEL • Occasional travel for customer site visits and trade shows • Primarily domestic travel, with potential for visits to U.S. military or government contractor locations • Valid U.S. passport required Job Type: Full-time Pay: $100,000.00 - $115,000.00 per year Benefits: • Paid time off Schedule: • 10 hour shift • 8 hour shift Work Location: In person
See More Details >>• *We are hiring for both experienced and recent grad positions for this growing machine design and manufacturing operation Position #1 MECHANICAL ENGINEER (Machine Design) This position encompasses all facets of mechanical design engineering—including structural design of machine cells, stations, components, mechanisms, and tooling. In addition, the Mechanical Design Engineer will select component materials, specify purchased hardware requirements and collaborate with Controls Engineers to select electrical and pneumatic components. Provides machine, mechanism and tooling design along with drawing creation while under minimal technical supervision. This position works with the Project Engineer and design department to complete designs or participate in design teams. POSITION QUALIFICATIONS AND SKILLS Education: College accreditation with emphasis in engineering or equivalent experience, preferably from within a manufacturing firm—bachelor’s degree with concentration in mechanical engineering strongly preferred. Experience: machine design and/or engineering experience—experience within the special machine industry preferred. Additional skills: • Competent in the use and manipulation of 3D design software in a collaborative environment using top down design structure—SolidWorks design platform and Enterprise Product Data Management file platform preferred • Experienced in drawing creation for assemblies and details to include all dimensions, tolerances, and documentation to allow the manufacture and assembly of designs that meet specified requirements • Motivated to initiate and implement tasks, strategies and techniques in a goal oriented manner to increase productivity and profitability • Technically creative with an understanding of mechanical functions to provide solutions in a robust and economical manner • Capable of evaluating quotations, specifications, and documentation to discern functional requirements, identify missing information, and define tasks for mechanical designs • Organized and flexible in work functions allowing for dedicated, multitasking, and task interrupted duties • Analytical and decisive to define, evaluate and solve problems in an organized process • Strong communication skills, both written and verbal with competency in computer and Microsoft Office products • Ability to collaborate in team environments while maintaining individual duties effectively • Committed to integrity, ethical, and economical practices PRINCIPAL DUTIES AND ACTIVITIES The principal duties will include, but not be limited to: · Preparing drawing packages for manufacture and assembly - ensuring complete and accurate with project documentation that meets all customer drawing requirements as well as proper drafting standards · Using SolidWorks and various other software packages to develop equipment, machine, mechanism or tooling designs that meet customer specifications and the company quote. · Knowledgeable in standards, processes and best practices and able to use them to complete duties. · Working closely with Project Managers, Controls Engineers, Applications Engineers, the manufacturing team, and customers to develop systems and develop systems and complete projects. · Sharing with department staff the design methodologies, productivity tools, standards, processes, and legacy information for increased knowledge and experience within the department. · Identifying and attending outside training sessions consistent with company goals and areas of expertise to ensure continuing education and technical skill advancement. · Mentoring less experienced design staff and assisting in the development of concepts and design methodologies for projects. · Communicate design requirements to junior team members, answer questions and monitor work to support further development of the design · Understanding design team members’ skill level when assigning design tasks to junior team members ---------------------------------------------------------------------------------------------- Position # 2 Mechanical Applications Engineer SUMMARY: The Applications Engineer is a technical authority to the organization on one or more of the Company’s product lines. Individuals in this position must have in depth knowledge of product application, product design, and industry standards. Applications Engineers are primarily focused on sales activity evaluating new opportunities to determine the Company’s ability to manufacture products that meet customer requirements. Once that determination has been made, they specify and quote standard product or prepare cost estimates for non-standard product. After the sale, the Applications Engineers supports engineers and production personnel in the design, build, testing, and installation of finished products ESSENTIAL DUTIES AND RESPONSIBILITIES: · Provide technical support to the entire organization for one or more Company product lines · Review opportunities (RFQ’s) and specify company product to meet customer applications · Interact with customers while developing product solutions and closing new business · Prepare cost estimates for non-standard products · Prepare, send, and follow-up on quotations as assigned · All other duties as assigned. SUPERVISORY RESPONSIBILITIES: None QUALIFICATIONS: · Industry knowledge of product application · Knowledge of product design and shop floor processes as required to estimate product cost · Knowledge of fundamental calculations supporting product design · Fluent in CAD as is required to develop equipment layouts or proposal drawings · Basic knowledge of electrical controls · Excellent people skills as required for customer interaction and to team with other personnel in meeting customer expectations · Excellent verbal and written communication skills EDUCATION/EXPERIENCE: · Position requires a Bachelor of Science Degree in an engineering field preferably mechanical engineering · Additional relative experience may be considered for less formal education. Job Type: Full-time Pay: $70,000.00 - $85,000.00 per year Benefits: • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance Schedule: • 8 hour shift Ability to Commute: • Sandusky, OH 44871 (Required) Ability to Relocate: • Sandusky, OH 44871: Relocate before starting work (Required) Work Location: In person
See More Details >>Embarking on a career in the mechanical trade in Sandusky, OH, typically begins with a structured apprenticeship, blending hands-on experience with theoretical knowledge, allowing individuals to earn while they learn. Apprenticeships in this field generally span three to four years, demanding extensive training under seasoned professionals. According to the U.S. Bureau of Labor Statistics, there are approximately 821 mechanical trade professionals in Sandusky, with wages averaging around $864.78 per week. The trade is projected to see a robust job growth, with opportunities expanding across various sectors including manufacturing and renewable energy. Aspiring mechanical trade professionals can leverage resources from trade schools, unions, and platforms like Gild to find apprenticeship opportunities, leading to a rewarding career with strong earning potential, often exceeding $890 per week for experienced professionals.
