MACHINE OPERATORS NEEDED!!! Responsible for, the set up of the machine, bringing materials to the hopper and inspecting the alarm to ensure proper operation. Monday - Saturday (Required) 1st shift 4:00 AM - 4:00 PM 2nd shift 4:00 PM - 4:00 AM Shifts rotate on a quarterly basis. 1. Make sure tile is the correct material and color 2. Visually monitor all tile being made 3. Check that the tile is good quality (surface, color, thickness, wetness, etc.) 4. Make sure the blades are making clean cuts on tile ends and side trim 5. Check/adjust that nail holes are deep enough 6. Pull tile from wet line to quality check 7. Notify QA of quality problems or questions 8. Remove any reject tile, recycle and place mold on dry line 9. Constantly monitor hopper to prevent build-up 10. Bang the sides, shake or poke through build-up in hopper 11. Monitor raw materials mixing system belts for alignment and wear 12. Check molds coming in the tile machine from the in feed line to ensure they are clean and undamaged; stop line if needed 13. Ensure that molds are being properly sprayed and covered by oil; adjust if needed 14. Monitor recycler belt 15. Watch liquid gauges 16. Monitor and clean the cut-off system and recycle material 17. Listen for potential and real problems with the machine 18. Complete the TMO check sheets 19. Notify supervisor and/or mechanic of any problems Required qualifications: • 18 years or older • Legally authorized to work in the United States MACHINE OPERATORS NEEDED!!! Responsible for, the set up of the machine, bringing materials to the hopper and inspecting the alarm to ensure proper operation. Monday - Saturday (Required) 1st shift 4:00 AM - 4:00 PM 2nd shift 4:00 PM - 4:00 AM Shifts rotate on a quarterly basis. 1. Make sure tile is the correct material and color 2. Visually monitor all tile being made 3. Check that the tile is good quality (surface, color, thickness, wetness, etc.) 4. Make sure the blades are making clean cuts on tile ends and side trim 5. Check/adjust that nail holes are deep enough 6. Pull tile from wet line to quality check 7. Notify QA of quality problems or questions 8. Remove any reject tile, recycle and place mold on dry line 9. Constantly monitor hopper to prevent build-up 10. Bang the sides, shake or poke through build-up in hopper 11. Monitor raw materials mixing system belts for alignment and wear 12. Check molds coming in the tile machine from the in feed line to ensure they are clean and undamaged; stop line if needed 13. Ensure that molds are being properly sprayed and covered by oil; adjust if needed 14. Monitor recycler belt 15. Watch liquid gauges 16. Monitor and clean the cut-off system and recycle material 17. Listen for potential and real problems with the machine 18. Complete the TMO check sheets 19. Notify supervisor and/or mechanic of any problems Required qualifications: • 18 years or older • Legally authorized to work in the United States
See More Details >>Entering the Machining trade in The Villages, FL, typically begins with specialized education and training, often through apprenticeship programs that combine hands-on experience with classroom instruction. These apprenticeships last about four to five years, requiring extensive training under experienced professionals. According to the Bureau of Labor Statistics, there are approximately 288,789 machinists nationwide, with a median annual wage of $50,840. In The Villages, FL, machinists can earn an average of $1,585 per week, with experienced professionals often exceeding $108,000 annually. Educational pathways include apprenticeship programs, postsecondary education, and on-the-job training, all of which are facilitated by trade schools, technical colleges, and industry organizations, leading to a rewarding career with strong earning potential.
