Summary: Installation & removal of electrical systems. Troubleshoot and repair equipment throughout the facility. Perform electrical preventative maintenance in accordance with the plant preventative maintenance program. Primary Responsibilities: The responsibilities of this position include, but are not limited to: • Troubleshoot and repair electrical sytems on equipment & within the facility. • Use equipment manufacturer's operating and parts manuals to diagnose and make repairs, including selection of replacement parts. • Determine proper wire & conduit sizes for new equipment & relocations per the NEC. • Oversee and manage contractors, ensure that they follow all HSE policies. • Perform preventative maintenance on electrical systems, motors, compressors & chilled water systems in accordance with the plant preventative maintenance program. • Assist the Maintenance Manager in evaluating and determining permanent solutions to problem areas. • Support the installation of new and used equipment. • Capable of designing & laying out complex machine layouts of equipment power runs originating from bus ducts and/or feeder panels. • Capable of safely performing energized electrical work on systems up to 600 vac, including installation of bus plugs or circuit breaker installations. • Work with team members on large projects when requested by the Maintenance Manager. • Troubleshoot and repair electrical, mechanical and hydraulic equipment. • Requires regular attendance per the schedule assigned by supervisor. Knowledge and Skill Requirement: This position should possess the following skills/knowledge: • Preferred Oklahoma Journeyman/Contractor license or equivielent certifications • Five (5) years electrical experience in an industrial environment. • Experience in set up of new and used equipment. • Capable of supervising outside contractors. • Must be knowledgeable of National Electric Code. Environmental / Atmospheric Conditions: • Typical office/factory environment with possibility of exposure to heat in production areas. Working Conditions / Physical Requirements: • Capable of working at heights up to 65 ft. using aerial platform lifts • Must be capable of lifting up to 50 lbs. • Ability to be on your feet for long periods of time. • Ability to work overtime as needed to meet schedules & deadlines required to meet production requirements This position is considered a safety sensitive position as defined by Oklahoma House Bill 2612 in relation to the legalization of medical marijuana in the state of Oklahoma.
See More Details >>Position Summary: We are seeking a skilled and reliable Commercial/Industrial Electrician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing electrical systems in commercial and industrial facilities. This role requires a strong understanding of troubleshooting, installing electrical devices and wiring, electrical codes, blueprints, and safety procedures. Job Duties and Responsibilities: • Troubleshoot/observe installed systems to detect the existence of electrical hazards and other problems. • Install, inspect, and maintain electrical systems, wiring, equipment, and fixtures in commercial and industrial environments. • Read and interpret blueprints, technical drawings, and electrical code specifications. • Diagnose malfunctioning systems using test equipment and hand tools to locate the cause of a breakdown and correct the problem. • Connect wires to circuit breakers, transformers, or other components. • Test electrical systems and continuity of circuits to ensure safety and compatibility using testing devices. • Plan layout and installation of electrical wiring, equipment, and fixtures based on job specifications and local codes. • Run conduit and new circuits. • Repair or replace faulty electrical equipment. . • Assist with assembling and installing new equipment and machines. • Perform routine maintenance to ensure systems operate efficiently and effectively. • Collaborate with plant managers, engineers, and other construction professionals to ensure timely completion of projects. • Adherent to safety protocols and regulatory compliance standards at all times. • Provide technical support and/or problem-solving activities. Minimum Qualifications: • Must be authorized to legally work in the United States. • High school diploma, GED, or equivalent; completion of a recognized apprenticeship program required. • Completion of an electrical apprenticeship. • 3+ years’ experience in commercial or industrial electrical work is required. • Strong knowledge of the National Electrical Code (NEC) and local regulations. • Proficient in using electrical tools and testing equipment. • Ability to work independently and as part of a team. • Good physical condition and ability to work in various environments, including heights and confined spaces. • Boiler Certification and/or Welding Certification is a plus. • PLC Experience is a plus. Physical Requirements: • Ability to stand, walk and sit for extended periods of time. • Ability to bend, reach at, below and above shoulder level. • Ability to lift, carry, twist, push and/or pull more than 100 pounds at a time with frequent lifting or carrying a minimum of 50 pounds. • Visual acuity required to perform job duties safely and effectively. • Ability to hear and respond to verbal instructions, alarms, and other sounds. • Ability to work at all heights. • Required to comply with correct and proper use of Personal Protective Gear (PPE). Working Environment: Exterior and interior ambient temperatures. While performing the duties of this job, the employee is regularly exposed to moving machinery in a production environment. The noise level in the work environment is loud and requires approved and provided hearing protection. Personal protective equipment (PPE) is required in the production department and other designated areas. Compensation: • Salary Range $26.29-30.02 / hour • Trainee period - 90 days Work Schedule: • Hours per day: 8 to 12 • Days per week: 5 to 6 (occasional Sundays – paid at 2x regular rate of pay) • Mandatory overtime (Varies with production schedule) • Must be open to work 1st, 2nd and 3rd shift (shifts can vary) Benefits: • 100% paid Medical / Dental / Vision Insurance for employee only (waiting period applies). • Affordable health insurance premiums for spouse and dependents. • 401(k) with company match. • Paid time off and holidays. Job Type: Full-time Pay: $26.29 - $30.02 per hour Benefits: • 401(k) • 401(k) matching • Dental insurance • Employee assistance program • Employee discount • Flexible spending account • Health insurance • Paid time off • Retirement plan • Vision insurance Schedule: • 10 hour shift • 12 hour shift • 8 hour shift • Day shift • Evening shift • On call • Overnight shift • Overtime • Weekends as needed Work Location: In person
See More Details >>Job Summary We are seeking an OK licensed (TX, NM license a plus) Journeyperson Electrician to join our team. The ideal candidate will have strong background in troubleshooting, installation and maintenance of electrical systems in commercial and industrial enviroments. This role involves working on various construction sites, where you will be responsible for installing, maintaining, and repairing electrical systems. The successful candidate will demonstrate proficiency in using hand tools, power tools, voltmeters, and ohmmeters, as well as the ability to read blueprints and schematics. Responsibilities • Install, maintain, and repair electrical systems in commercial buildings according to NEC standards. • Read and interpret blueprints and technical drawings to determine the layout of electrical systems. • Utilize voltmeters, ohmmeters, and other testing devices to troubleshoot electrical issues. • Work collaboratively with other tradespeople on construction sites to ensure timely project completion. • Ensure all work complies with safety regulations and industry standards. • Perform routine inspections and maintenance on electrical systems to ensure optimal performance. • Install logic controllers and other automated systems as required for specific projects. • Maintain a clean and organized work environment while adhering to safety protocols. Qualifications • Proven experience as a Journeyperson Electrician or similar role in a commercial setting. • In-depth knowledge of NEC regulations and safety standards related to electrical work. • Proficient in blueprint reading and understanding technical specifications. • Experience with hand tools, power tools, voltmeters, ohmmeters, and logic controllers. • Strong problem-solving skills with the ability to troubleshoot complex electrical issues effectively. • Excellent communication skills and the ability to work well within a team environment. • Valid electrician's license or certification as required by local regulations. Join our team of professionals dedicated to delivering high-quality electrical services while ensuring safety and compliance on every project! Qualifications • Journeyman Electrician • Electrical License Job Type: Full-time Pay: $28.00 - $35.00 per hour Benefits: • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance Compensation Package: • Hourly pay • Overtime pay Schedule: • Monday to Friday • On call • Weekends as needed Work Location: In person
See More Details >>Becoming an electrician in Shawnee, OK typically starts with an apprenticeship, which combines hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships in Shawnee last about four to five years, requiring many hours of training under licensed professionals. The U.S. Bureau of Labor Statistics reports 762,600 electricians nationwide, with a significant presence in Oklahoma, and projects a 6% job growth from 2022 to 2032. Apprentices in Shawnee earn an average of $613 per week, with an annual overtime average of $47,000. Trade schools, unions, and local platforms help aspiring electricians find apprenticeship opportunities, leading to a career with strong earning potential—often exceeding $103,900 annually for experienced professionals.
