• **THIS IS MAINTENANCE***NO PER DIEM*** Position Summary Install, repair and maintain electrical wiring, conduit, equipment and fixtures. Journeyman Electrician I will perform work underground and above ground performing cable and conduit installations. Perform electrical maintenance repairs in an Industrial setting while leading lesser skilled electricians to ensure a safe work environment. Qualification • Must possess a TDLR Journeyman License, or TDLR Masters License, or NCCER Certified Plus Industrial Electrician or completed the ZCAP Journeyman Electrician Qualification program • Must be able to read and interpret prints, drawings, schematics and plans • Thorough knowledge of Electrician hand, power tools and layout tools • Must have required tools • Must be able to work at heights of 300 ft. • Must be able to meet the physical demands and pre-employment conditions • Must have reliable transportation and be able to work 7 days a week JOB REQUIREMENTS Position Responsibilities • Responsible for complying with all Zachry and site specific safety rules with over sight of co-workers to ensure compliance • Responsible for following direction from a Multi-Craft Electrician, General Foreman, Craft Superintendent, Site Superintendent and or Project Manager • Responsible for complying with the Lock, Tag and Try work procedure; this standard applies to the Sweeny Refinery, associated facilities, and outlying terminals. Will have over sight of co-workers within your area of responsibility to ensure compliance • Responsible for inspecting all designated work areas for hazards • Participate in and complete the Zachry Craft Advancement Program (ZCAP) for Electricians per Site established guidelines. • Responsible for performing detailed inspections on hand and power tools to ensure they are safe to operate and in proper working order • Responsible for the safe use of hand and power tools such as conduit benders, screwdrivers, pliers, knives, hacksaws, wire strippers and drills with over sight of co-workers to ensure compliance • Responsible for examining blue prints, sketches, diagrams, building plans and specifications to determine locations of circuits, outlets, load centers, panel boards, wires, conduit, components and other equipment • Responsible for carrying, cutting, bending, connecting and installing conduit as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for pulling cables and conductors through specified pathways as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for the modification, fabrication and installation of cable trays as required and as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for the safe operation of testing equipment to validate connections and ensure capability of circuits using such tools as clamp meters, ohmmeters, voltmeters and harmonics testers with over sight of co-workers to ensure compliance • Responsible for the inspection and testing of all electrical equipment to ensure safe operation and to certify it is operating as intended with over sight of co-workers to ensure compliance • Responsible for the safe installation and maintenance of temporary power systems and their distribution system as defined in NFPA 70 (NEC 2014) with direct over sight of co-workers to ensure compliance • Responsible for the installation and maintenance of the assured equipment grounding / bonding on equipment and facilities with over sight of co-workers to ensure compliance • Responsible for terminating wire/cable to electrical equipment such as but not limited to outlets, switches, breakers, control panels, and distributions systems with over sight of co-workers to ensure compliance • Responsible for observing all state and local building / electrical codes • Responsible for leading the Safety Task Assessment (STA) meetings • Performs other duties as required Essential Skills, Knowledge and Abilities: • Use of mathematics to validate operation and installation methods per NEC 2014 standards • Organization and time management • Active listener • Good decision making skills • Customer service oriented • Ability to work with others – Team player • Good communication skills with co-workers and supervisors • Commitment to Zachry values, safety rules and regulations Physical demands and work environment: • Physical demands: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 25lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. • Work environment: Will work in all weather conditions ranging from warm/hot – cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. Certifications and / or Licenses Required* - • Texas Department of Licensing and Regulation Journeyman Electrician License Or • Texas Department of Licensing and Regulation Master Electrician License Or • NCCER Industrial Electrician Certified Or • Achieved Journeyman Electrician Level Qualification through Zachry Craft Advancement Program (ZCAP) ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS MVR NCCER APPRIENTENCE LIENCE ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
See More Details >>Contribute. Grow. Lead...with OxyChem. Looking for a challenge? Desire to achieve your true potential? OxyChem is a growing, action-oriented, safety driven chemical manufacturing company continually striving to be the best in the business while staying focused on environmental protection. The secret to our success has and will continue to be our people. Occidental Chemical Corporation (OxyChem) is a leading North American manufacturer of polyvinyl chloride (PVC) resins, chlorine and caustic soda – key building blocks for a variety of indispensable products such as plastics, pharmaceuticals and water treatment chemicals. Other OxyChem products include caustic potash, chlorinated organics, sodium silicates, chlorinated isocyanurates and calcium chloride. OxyChem's market position is among the top three producers in the United States for the principal products it manufactures and markets. Based in Dallas, Texas, the company has manufacturing facilities in the U.S., Canada and Latin America. In a fast-paced industry that demands precision, we create a supportive workplace where the safety and well-being of our employees are paramount. We are committed to rewarding top performers, offering very competitive pay and benefits, and providing tremendous career development opportunities. We are looking for an experienced and self-motivated individual to fill the position of Electrician within our Manufacturing facility located in Pasadena, TX. Essential Job Duties: • Maintain protection of the environment and the health and safety of our employees, customers and communities in which we operate and transport our products as a highest priority. • Must be proficient in troubleshooting 120 volt AC controls, 480 volt motors and switch gear. • Conduct evaluation tests on valves and motors. • Support the Process Safety and Risk Management goals and objectives. • Participate in site-wide Process Safety and Risk Reduction activities as requested. • Keep shop, tools and work area picked up and clean. • Maintain prints and files in proper place. Document work (as found, as left) and update procedures, drawings, specs and files.I-KG1 Qualifications: • High School Diploma or GED required. • Five (5) years process instrumentation/electrical maintenance experience in industry OR two (2) years maintenance experience in industry and Associates Degree in Electrical Technology or Certificate of Technology in Electrical. • This position requires proof of the NCCER certification prior to employment (electrical and/or instrumentation preferred). • Must be proficient in troubleshooting 120 volt AC controls. • Must be proficient in troubleshooting 480V, 2400V, 13.8 KV switchgear. • Working knowledge of motor repair, inspection and troubleshooting motor control systems. • Working knowledge of the inspection, maintenance and troubleshooting of distribution and power transformers. • Must be proficient in troubleshooting using loop drawing, schematics, ladder logic, and P & I drawings. • Working knowledge of National Electrical Code • Troubleshoot problems and consult directly with equipment vendors for resolution. • Ability to work overtime, weekends, holidays and shift work. • High proficiency in Microsoft applications. • Ability to read, write and speak in English. • Excellent written and verbal communication skills. • Excellent interpersonal skills including the ability to work as part of a team. • Must possess valid driver’s license. Physical requirements: • Must be able to lift 40 lbs., climb ladders and stairs. • Walking, bending, stooping is required. • Must be able to wear personal protective equipment including the use of a respirator. • Must be able to respond to visual and audible alarms. Recruitment Fraud It has come to our attention various individuals and/or organizations are contacting people falsely pretending to recruit on behalf of Oxy. Please be aware that these recruiting scams and communications do not originate nor are they associated with our recruitment process. All Oxy job postings and offers will require a completed application through our company website. Oxy does not charge a fee at any stage of the recruiting process. We will never: • Ask you to pay for applications, interviews, meetings, processing, training or for any other fees • Use recruiting or placement agencies that charge candidates an advance fee of any kind or • Request personal information such as passport and bank account details at an early stage of our recruitment process. We recommend against responding to unsolicited business propositions or offers from people you don't know. Do not disclose your personal or financial details. If you believe you have been the victim of a recruiting scam, please contact your local police department. All qualified applicants will receive consideration for employment without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law.
See More Details >>Who We Are: For over 35 years, ISC has provided safe, high quality electrical, instrumentation and controls solutions to global leading industrial manufacturers. With offices in Baton Rouge, Beaumont, Corpus Christi, and Houston, as well as job sites around the country, ISC has grown our team as high 3,000+ associates and offers full-service engineering, construction, and maintenance solutions throughout the United States. The Position: We are looking for a couple of positive, energetic, experienced ELECTRICIANS for our Small Caps Division, with a wide variety of abilities to complement our experienced workforce. Applicants should have the ability to: • Fabricate and install rigid, aluminum, E.M.T., plasti-bond and P.V.C. conduit • Must have the ability to use mechanical and 2” – 4” hydraulic benders • Must be able to fabricate and install conduit supports • Must have the ability to install wire and cable by either hand or machine in cable trays • Must perform MCC and switchgear work • Must be able to perform troubleshooting on energized motor controls • Can fabricate and install breakers and fuses, cable trays, batteries, battery charger, buss duct, junction boxes, tagging, term, motors, and transformers • Can size thermal-overloads, breakers, and fuses • Able to terminate motors, transformers, stress cones and cable splicing • Understand the proper use of hydraulic tools • Can read blueprints and national electric code requirements • Knowledgeable in the use of electrical equipment testers including V.O.M., AMP meter and 1000-volt insulation tester • Knowledgeable in communication and applicable electrical OSHA rules and regulations Requirements: • Valid Texas Electrical License: go to TDLR website for more information • Ability to meet the cut score on the National Center for Construction Education and Research (NCCER) Skill Assessment. • Ability to pass a post-offer, pre-employment drug/alcohol test and applicable background checks. • Minimum 6 years craft-specific experience. Other Information: • Excellent wages and complete benefits package. • We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. • ISC evaluates and hires applicants for employment based exclusively upon the applicant’s merit. No applicant will ever be required to pay money (or any other form of compensation) to an ISC employee in order to be hired by or considered for employment with the Company. • This announcement is not intended to be a complete listing of all similar, miscellaneous, or incidental, duties, which may be required from day-to-day. ISC utilizes the multi-skill concept and expects all associates to perform other job requirements. • No Per Diem • NOT A DISA Site • 4-10'S
See More Details >>Becoming an electrician in Pasadena, TX typically begins with an apprenticeship, combining hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about four to five years, requiring many hours of training under licensed professionals. According to the U.S. Bureau of Labor Statistics, there are approximately 68,055 electricians nationwide, with a significant presence in Pasadena, TX. The average wage for electricians in Pasadena is approximately $1002.90 per week, with experienced professionals often earning over $1157.05 weekly. Trade schools, unions, and platforms like Gild help aspiring electricians find apprenticeship opportunities, leading to a career with strong earning potential.
