About Us: Rex Moore continues to be powered by amazing employees just like you for over 100 years. Together we are building a world that is safe, comfortable, and sustainable. Our diverse team of experts spreading to National territories create innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure. Watch Our Story: About Rex Moore Group, Inc. - YouTube Key Responsibilities and Essential Tasks: Under Direct supervision employee has the ability to demonstrate the following competencies. Responsibilities include, but are not limited to: • Proficient interpretation and application of utilities blueprints as applied to the electrical scope • Follows all live-work policies & procedures • Interprets & applies requirements of NEC for all installations, including special systems & occupancy • Able to read UBC, NFPA-72, NFPA-70E, construction safety orders and all applicable code requirements proficiently • Investigates or assists in investigation and reporting of near misses, incidents & injuries involving jobsite employees Under General supervision employee has the ability to demonstrate the following competencies. Responsibilities include, but are not limited to: • Supervises, directs, monitors, trains and works alongside one Electrician Trainee and/or one Apprentice delegated to assist him/her to ensure a safe and timely completion of assignment(s) • Demonstrates proficiency in all aspects of trade related materials, components, equipment, systems, methods of installation, safety procedures, safe work practices, basic calculations, blueprint and drawing interpretation & troubleshooting • Operates any hand and power tools and equipment necessary to perform all trade associated assignments • Effectively communicates technical information with peers, assistants, project supervision & other trades • Proficient at the interpretation and application of electrical blueprints, shop drawings and details. • Proficient interpretation and application of architectural blueprints as applied to the electrical scope • Proficient interpretation and application of civil blueprints as applied to the electrical scope • Proficient interpretation and application of structural blueprints as applied to the electrical scope • Proficient interpretation and application of plumbing blueprints as applied to the electrical scope • Completes multi-task assignments involving all aspects of the trade via verbal and written instructions, field sketches, schematics, one-line diagrams & blueprint reference • Able to generate complete tools & materials list for assigned task(s) • Performs assignment lay-outs and preparation for installation via verbal and written instructions, field sketches & blueprint reference • Instructs employees assisting him/her in the correct operation of tools and equipment, safe work practices, electrical principles & applicable NEC • Provides useful input on employee evaluations • Able to perform troubleshooting and problem resolution in electrical circuits, systems & equipment in situations where the EEW policy does not apply (where no shock or arc flash hazard exist and no permit is required) • Performing metering and testing up to 480-volts maximum in situations where the EEW policy does not apply (where no shock or arc flash hazard exist and no permit is required) • Is proficient with the use of the volt meter • Is proficient with the use of the ammeter in situations where the EEW policy does not apply (where no shock or arc flash hazard exist and no permit is required) • Is proficient with the use of the insulation/resistance meter • Demonstrates a positive attitude and eagerness to learn the trade • Demonstrates reliability and initiative • Abides by Rex Moore's company rules, policies and safety requirements and reports all violations and incidents to immediate supervisor or safety manager • Performs all tasks in a timely manner to meet production standards What's in it for You? We're growing and need people excited about honing their craft and developing their career. If you're ready to push your skill level, learn something new every day, and be part of tomorrow's energy source, join the Rex Moore Family. Some of the benefits you may be eligible for as an employee are: • Health Benefits • 401(k) with Company Match • Life and Disability Benefits • Paid Holidays & Paid time off • Access to multiple types of training • Opportunities for Self-development and Career Progression • Wellness Benefits & Employee Assistance Program • Family Leave (Maternity, Paternity) • Tuition Reimbursement Program • Apprenticeship Program Work Environment: Regularly exposed to environmental conditions inside and outside: inclement weather, cold, heat, and humidity. The noise level in the work environment can be loud. Frequently exposed to vibrations, moving mechanical parts, moving vehicles, machines, dust and chemicals. May be required to function in crawl spaces, shafts, man holes, small enclosed rooms, and other areas of close proximity. Occasionally required to work on elevated surfaces including on ladders and lifts. Career Advancement: At Rex Moore, we provide amazing job opportunities for growth with competitive salaries and benefits in an exciting, dynamic, fast-paced, and fun workplace environment. Are you looking to build a strong career? Then we have an opportunity for you! Compensation: Rex Moore pays hourly/salary rates commensurate with each employee’s knowledge, experience and skill level. EOE Qualifications: In addition to the tasks listed, the ideal candidate shall have, at minimum: • High school diploma or equivalent • Holds a current State Certified Electrical Journeyman license, if mandated by the state. Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Regularly required to talk in order to communicate detailed, important, and accurate instructions to internal and external customers. • Frequently required walking for long and short distances, walking from one worksite to another. • Frequently required to stand for sustained periods of time • Frequently required to bend or twist at the neck and torso • Frequently required to crouching, squatting, stooping, kneeling • Frequently required to use and climb ladders to work from heights • Occasionally required to use scissor, boom, and other personnel lifts to access the work area • Frequently required to reach above head • Frequently required to reach forward, grab, grasp, pinching, handle material and tools using upper extremities • Frequently required to perform repetitive motion tasks • Frequently required to pull or push using force • Frequently required to lift objects from low to high positions in horizontal to vertical motions • Frequently required to lift objects weighing up to 25lbs • Occasionally required to lift objects weighing up to 50lbs with assistance • Occasionally sitting in chair, vehicle, or equipment • Frequently required to talk, express or exchange detailed, important information by means of verbal communication. • Constantly required to hear sounds at normal speaking levels with or without correction. Ability to hear detailed information and distinguish sounds to avoid hazards. • Required to have near and far sited visual acuity with or without correction. Must be able to inspect small parts, operating tools, using measurement devices and/or assembly or fabrication parts. Must also be able to visually identify and read posted signs, instructions, and identify possible hazards Required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned. PM22
See More Details >>POSITION SUMMARY: To perform electrical and instrumentation inspections, repairs and rebuilds on all plant operating equipment to ensure continuous operation within the required quality control standards. This role is critical to achieving Plant OEE and Equipment Availability goals by elimination of unplanned stops and extended downtimes. Incumbents in the position are required to participate in company-sponsored training and certification programs to ensure that their job knowledge and skills meet evolving company standards. RESPONSIBILITIES & EXPECTATIONS: • Comply with company, state and governmental health and safety regulations at all times • Complete and document Workplace Inspections in a timely manner • Be able to perform preventive maintenance checks and report findings (both verbally and in writing) • Participate in the work order initiation process when required • Ensure all inventory parts are correctly charged from Stores and assist with procurement of parts used as per LNA procedures • Possess a good knowledge of power distribution systems • Be able to perform low voltage and high voltage terminations • Have some experience and/or willingness & ability to learn performing maintenance on switchgear up to 2300 volts. • Knowledge of low, medium and high voltage switching applications. • Experience with motor ground testing and record keeping in Microsoft Excel. • Experience with Windows OS and Microsoft Office programs. AutoCAD and SAP experience preferred but not required. • Experience in troubleshooting and maintaining all types of motor control circuits. • Perform basic electrical calculations • Perform tasks with all electrical test equipment (volt meters, meggers, current generators, loop calibrators, etc) • Experience to fabricate and install conduit • Perform soldering operations • Experience in testing, troubleshooting and repairing AC/DC motors and drives • Install and align electrical motors • Experience troubleshooting and maintaining air dryers • Experience in calibrating, troubleshooting and maintaining belt-weighing devices • Experience maintaining and replacing process control circuits including control valves, actuators and positioners • Should possess some knowledge of the CMMS System and be willing to correctly complete work orders and checklist including signing and dating • Be familiar with thermography and fully understand the uses • Experience to perform troubleshooting and repairs on Gas Analyzers • Experience to troubleshoot and maintain variable speed drives ATTRIBUTES: What are the Essential Knowledge/Skills/Abilities for this position? • Capable of working any shift, overtime, be on-call, or work seven days a week, if needed. • Multi task with a strong sense of urgency to meet the customer needs. • Work well within a team environment and take instructions from management and co-workers. • Self-starter with the ability to work independently. • Must possess the basic reading and math skills. • Good written and verbal communication skills. • Have basic computer skills on how to use MS Office products and SAP. • Strong record of attendance reliability. • Understand and observe all department and plant safety rules and maintain a high level of housekeeping in assigned work areas. • Perform the essential job duties required of this job. Physical Demands include, but are not limited to: • Must be physically able to perform work assigned. • Must be physically capable of accessing all plant locations. • Access all areas within a site which could include heights of 150 feet, confined spaces, climbing ladders or stairs, and accessing tunnels. • Will be working at times in covered environment but mainly in a lime/mineral environment. • The employee will be exposed to the following working conditions: Extreme Heat and Cold, Noise, Vibration, Oils, and Atmospheric Conditions such as Dust, Fumes, and Lime/Mineral Particles. • The employee will be required to perform the following actions (from time to time): Standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. • Ability to occasionally lift/carry 50 pounds. Required Experience: Five (5) to Seven (7) years electrical experience. Completion of an apprenticeship program, technical program, or equivalent experience in industrial background. Preferred Experience: Previous heavy manufacturing and/or mining experience is highly preferred. Required Education: High School Diploma or GED equivalent. Preferred Education: Current Journeyman license.
See More Details >>About Us: Rex Moore continues to be powered by amazing employees just like you for over 100 years. Together we are building a world that is safe, comfortable, and sustainable. Our diverse team of experts spreading to National territories create innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure. Watch Our Story: About Rex Moore Group, Inc. - YouTube Key Responsibilities and Essential Tasks: • Employee has the ability to demonstrate the following competencies. • Responsibilities include, but are not limited to: • Effectively communicates and coordinates work and activities with Project management team, GC, owner reps, crew members and other trades. • Forecasts Training and order manpower, material, tool & equipment needs well in advance to ensure that the proper tools/equipment, materials, information, manpower & other requirements are on the project when needed. • Proceeds with work via written and verbal instructions, plans, drawings & specifications. • Coordinates and manages equipment rentals. • Identifies, schedules and facilitates all jobsite related inspections. • Documents and reports all disciplinary issues to HR and implements any actions or procedures as instructed by HR or supervisor. • Performs 10-5-2-1 on all installation activities • Completes a weekly SIS (Short Interval Schedule) with a minimum of 2 weeks forecasted • Participates in daily and weekly team meetings • Demonstrates strong expertise in all aspects of trade related materials, components, equipment, systems, methods of installation, safety procedures, safe work practices, basic calculations, blueprint and drawing interpretation & troubleshooting. • Possesses leadership qualities to effectively direct a crew • Meets or exceeds project schedules, productivity standards & monetary budgets. • Instructs employees assigned to him/her in the correct operation of tools and equipment, safe work practices, electrical principles and applicable NEC • Evaluates employees under his/her supervision in a timely manner. • Ability to ensure a safe workplace, employee compliance with safety and health policy and reduce exposure to liability risks such as theft or damage • Ability to represent the company in a professional manner and to keep both the customer’s and company’s best interest as a priority • Embody Rex Moore's purpose, vision, mission, and values in daily actions, interactions, leading by example and influence others to do the same. • Provides a level of guidance, training and mentorship to all lower-level employees • Operates any hand and power tools and equipment necessary to perform all trade associated assignments. • Demonstrated knowledge of construction scheduling and critical path management (CPM). • Proficient at the interpretation and application of electrical blueprints, internal shop drawings and details. • Proficient at the interpretation and application of architectural, civil, structural, plumbing and utility blueprints. • Demonstrates effective supervision and management of all employees under his/her jurisdiction. • Plans and schedules work for subordinate supervision, lead persons and crew as needed. • Completes, in an accurate & timely manner, administrative requirements and documentation such as time sheets, labor coding, daily logs, material and tool requisitions, man loading schedules, incident/injury reports & employee notifications. • Proficient at interpreting construction related accounting reports; e.g. job cost & risk detail). • Monitors labor productivity, quality control and direct the crew in such a manner so as to meet project schedules and production quotas. • Prepares detail drawings for job as needed. • Troubleshoots and resolves problems in electrical circuits, systems & equipment. • (Avoids hot work at all necessary costs but at times) Performs metering and testing on systems not exceeding 480 volts following live-work policies & procedures using common meters and test instruments. • Directs and performs work within all applicable code standards (NEC, CEC, Title 24, Utility standards, City standards, etc.) • Works with tools alongside crew when required or as directed. • Proficient in digital technology and systems, including computers, iPads, phones, and all job-related software and applications • Forecasts and identifies training and development needs for all lower-level employees within a timely manner What's in it for You? We're growing and need people excited about honing their craft and developing their career. If you're ready to push your skill level, learn something new every day, and be part of tomorrow's energy source, join the Rex Moore Family. Some of the benefits you may be eligible for as an employee are: • Health Benefits • 401(k) with Company Match • Life and Disability Benefits • Paid Holidays & Paid time off • Access to multiple types of training • Opportunities for Self-development and Career Progression • Wellness Benefits & Employee Assistance Program • Family Leave (Maternity, Paternity) • Tuition Reimbursement Program • Apprenticeship Program Work Environment: Regularly exposed to environmental conditions inside and outside: inclement weather, cold, heat, and humidity. The noise level in the work environment can be loud. Frequently exposed to vibrations, moving mechanical parts, moving vehicles, machines, dust and chemicals. May be required to function in crawl spaces, shafts, man holes, small enclosed rooms, and other areas of close proximity. Occasionally required to work on elevated surfaces including on ladders and lifts. Career Advancement: At Rex Moore, we provide amazing job opportunities for growth with competitive salaries and benefits in an exciting, dynamic, fast-paced, and fun workplace environment. Are you looking to build a strong career? Then we have an opportunity for you! Compensation: Rex Moore pays hourly/salary rates commensurate with each employee’s knowledge, experience and skill level. EOE Qualifications: In addition to the tasks listed, the ideal candidate shall have, at minimum: • High school diploma or equivalent • Holds a current General Electrical certification through the state • At least 5-10 years of related experience Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Regularly required to talk in order to communicate detailed, important, and accurate instructions to internal and external customers. • Frequently required walking for long and short distances, walking from one worksite to another. • Frequently required to stand for sustained periods of time • Frequently required to bend or twist at the neck and torso • Frequently required to crouching, squatting, stooping, kneeling • Frequently required to use and climb ladders to work from heights • Occasionally required to use scissor, boom, and other personnel lifts to access the work area • Frequently required to reach above head • Frequently required to reach forward, grab, grasp, pinching, handle material and tools using upper extremities • Frequently required to perform repetitive motion tasks • Frequently required to pull or push using force • Frequently required to lift objects from low to high positions in horizontal to vertical motions • Frequently required to lift objects weighing up to 25lbs • Occasionally required to lift objects weighing up to 50lbs with assistance • Occasionally sitting in chair, vehicle, or equipment • Frequently required to talk, express or exchange detailed, important information by means of verbal communication. • Constantly required to hear sounds at normal speaking levels with or without correction. Ability to hear detailed information and distinguish sounds to avoid hazards. • Required to have near and far sited visual acuity with or without correction. Must be able to inspect small parts, operating tools, using measurement devices and/or assembly or fabrication parts. Must also be able to visually identify and read posted signs, instructions, and identify possible hazards • Required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned. PM22
See More Details >>Becoming an electrician in Salinas, CA, typically starts with an apprenticeship, which combines hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about four to five years, requiring many hours of training under licensed professionals. According to the U.S. Bureau of Labor Statistics, the average weekly wage for electricians in Salinas, CA, is approximately $1,430, with experienced professionals earning up to $1,563 per week. Trade schools, unions, and local platforms help aspiring electricians find apprenticeship opportunities, leading to a career with strong earning potential.
