Position Summary We are seeking a Welder A to join our team. In this role, you will utilize safe practices, Personal Protective Equipment (PPE), and procedural requirements while interpreting weld procedure specifications and engineered drawings. Your primary focus will be to tack and weld structural components such as beams, columns, joists, frames, stairs, and railings. Key Responsibilities • Safety & Compliance: Identify, prevent, and correct potential safety hazards in accordance with Southwest Steel policies and procedures. Always maintain a clean and safe work area. • Material Preparation: Identify and prepare materials for welding based on SWS Quality Management System (QMS) specifications and engineered drawings. Utilize appropriate tools and measuring devices for accuracy. • Welding Operations: Perform welding on components and assemblies using GMAW, FCAW, and GTAW* processes, following Southwest Steel weld procedure specifications. • Cutting & Shaping: Use equipment such as chop saws, band saws, and oxy/fuel torches to cut workpieces. Heat, form, and dress metal parts using hand tools, torches, or arc welding equipment. • Quality Assurance: Achieve a pass rate of 98% or higher for all CJP (Complete Joint Penetration) and PJP (Partial Joint Penetration) weldments. • Material Handling: Move and position structural components using chain rigging, overhead cranes, jib cranes, and other material handling equipment. • Inspection & Alignment: Inspect equipment and structural components to ensure alignment with Southwest Steel processes and procedures. Qualifications Required: • Certification: Ability to pass 3G FCAW, 2G FCAW, and 2F D1.3 GMAW weld tests. (*4G D1.1 FCAW; 3F D1.6 FCAW; 4F D1.6 FCAW; 3G D1.6 GTAW; 2F GTAW). • Expertise: In-depth knowledge of oxy/fuel operations, welding processes, shop machinery, and repair procedures for welding discontinuities. • Welding Skills and Quality Control: Ability to identify weld discontinuities and apply basic repair procedures to ensure high-quality welds. Intermediate-level knowledge of welding techniques to meet industry standards and project specifications. • Technical Skills: Proficient in interpreting blueprints, tolerance for gaps, holes, distortion control, camber, sweep, connections, splices, and cord length. Ability to identify weld discontinuities and in-depth knowledge of repair processes. In-depth knowledge of weld procedure specifications and weld symbols. • Equipment Operation: In-depth knowledge and ability to safely operate overhead cranes and jib cranes. • Tooling: Possess all necessary tools to effectively perform welding and fabrication tasks. • Work Ethic: Ability to multi-task, demonstrate punctuality, and maintain a strong work ethic in a team environment. Preferred: • Certification: Ability to pass 4G D1.1 FCAW; 3F D1.6 FCAW; 4F D1.6 FCAW; 3G D1.6 GTAW; 2F GTAW weld tests preferred and will be required for further advancement within this job classification. ABOUT US Southwest Steel is a steel fabrication and erection company that specializes in miscellaneous metal, steel stairs, railings, structural steel, and creatively unique custom steel pieces to complete projects from standard building needs to anything imaginable. Visit https://sws-steel.com/ to learn more. Southwest Steel is a division of SME Industries, Inc. Why Join Us? • Health and Wellness Benefits including Medical, Dental, Vision, Short Term Disability and Life Insurance. • Financial Benefits including competitive compensation and 401(k) plan. • Additional Benefits including Paid Holidays and Paid Time Off, Employee Assistance Program, and more. Position Responsibilities:This job posting reflects the current assignment of essential functions and is not meant to be all-inclusive. Duties and responsibilities may be assigned or reassigned to this position at any time. Equal Employment Opportunity: SME Industries, Inc. and its divisions (SME Steel Contractors, Southwest Steel, CoreBrace, DuraFuse, and SME Logistics) is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Employment Authorization: Applicants must be legally authorized to work in the United States without the need for employer-sponsored work authorization now or in the future. Proof of eligibility will be required upon hire. Job Type: Full-time Benefits: • 401(k) • 401(k) matching • Dental insurance • Employee assistance program • Health insurance • Health savings account • Life insurance • Paid time off • Vision insurance Shift: • Day shift • Night shift People with a criminal record are encouraged to apply Work Location: In person
See More Details >>Description: ENTEK is seeking applications for a talented Welder/Fabricator to build quality metal components for our clients and join us on-site at our Henderson, Nevada location (relocation within 40 miles of Henderson is required). As a Welder/Fabricator, you will read and interpret engineering blueprints, fabricate metal components or structures, and perform quality checks on finished products. In this role, you will work with different welding techniques, such as TiG and MiG welding, to weld a variety of metals, such as steel, stainless steel, and aluminum, to create a range of parts and assembled equipment that meet the required specifications. You will also perform tube and pipe welding MS. You will be responsible for building simple and complex fabrications based on prints such as tanks, frames, and hoppers from sheet metal and plate. To ensure success as an ENTEK Welder/Fabricator, you should have advanced knowledge of industrial metalwork, a good eye for detail, and excellent mathematical skills. Ultimately, a top-class metal fabricator expertly constructs high-quality products to exact specifications. Individuals invited to interview for this role will be required to perform a weld test, which will include 2G and 3G positions on mild steel and stainless steel, using MIG, TIG, and fluxcore, on 14ga, 10ga, 3/16" and potentially on 3/8" and 1/2". Requirements: Minimum Qualifications • High school diploma or GED • 3 to 5 years of experience as a Welder/Fabricator • Experience and familiarity with standard welding tools and procedures, including MIG, TIG, and Fluxcore. • Ability to read and interpret engineering blueprints. • Strong knowledge of fabricating and constructing metal components to produce strong, clean welds. • Initiative to perform quality checks on completed products, double-check design specifications before commencing cutting work, and test and inspect welded surfaces and structures to discover flaws. • Experience using various hand and power tools, calipers, and load-moving equipment (i.e., pallet jack, cranes, forklift, etc.). • Knowledge of proper handling of propane and pressurized gas cylinders. • Strong time-management skills. • Ability to self-manage behavior. • Ability to communicate effectively in written and spoken English. • Satisfactory results from a pre-employment fit-for-duty screen and a drug screen. Preferred Qualifications • Trade school program certificate. • Basic computer skills. Working Environment The hours for this role are Monday- Friday, 7:00 a.m. – 4:00 p.m. This role is based in a manufacturing shop environment, which may require the employee to [work with or near equipment that uses water / high heat / mechanical means to create metal-based products. The incumbent will spend most of their 8-hour shifts on their feet. This role requires the incumbent to regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. Incumbents will complete tasks that require finger dexterity, reaching, handling of materials and tools/and equipment, talking, and hearing, as well as near and far sight, peripheral vision, and depth perception. The individual in this role may be required to kneel, stoop, crouch, climb, and/or balance. The role may occasionally expose the employee to fumes and airborne particles, as well as temporarily high temperatures and temporarily bright light. This role requires wearing eye and hearing protection while working, including a welding helmet or hood. About ENTEK ENTEK’s DNA is based on a set of core values, which drive everything we do: Respect, Integrity, Innovation, and Commitment. Stop by our website at www.entek.com to learn more about our company and the opportunities that await you. ENTEK is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ENTEK’s locations are non-smoking. Please inquire if you have questions.
See More Details >>Shift: M-F 3pm - 12pm Pay: $20-$28 DOE Shift Differential $2.00 Boot Allowance $200.00 or as needed. What is the value of a WM job? The value of a WM job is more than a paycheck. Its a way to create opportunities for you and your family. We Are Stable: Our WM team is home every day, and our team members perform essential and meaningful work. We Are Committed to Growth: 100% tuition paid for benefits eligible employees and their family, and established career progression. We Are Investing in You: Amazing Medical, Dental & Vision, 401K with match, discounted stock options, dependent day care, and more! Who are we? #WeAreWM - Ready to roll with us? Click Apply to join the Waste Management team today. I. Job Summary Under general supervision, applies appropriate welds to fabricate or repair compactors, containers and carts. II. Essential Duties and Responsibilities Performs minor repairs and applies basic welding processes. Repairs compactors, containers and carts. Performs preventive maintenance inspections, diagnostic and repair of electrical and hydraulic systems on compactors. Qualified in the welding processes such as arc welding, gas welding, aluminum welding, brazing, and soft soldering on a variety of materials. Conducts safety checks on compactors and containers. Completes required paperwork utilizing fleet maintenance software program associated with repairing compactors and containers, documenting parts usage, and accounting for repair times. Assists senior welders in the completion of project work. Performs service calls for compactor repair. Performs related work such as flame cutting, bending, forming, beveling, notching of metal and plastic parts. Performs all work within Standard Repair Times (SRTs). Works from prints, drawings and verbal instructions. Performs standard layouts and set-ups of dimensions and tolerances. Utilizes standard shop hand tools, measuring devices and equipment. Performs other maintenance related work as required. Maintains a clean, safe work area in compliance with Corporate / OSHA Standards. Performs all work in accordance with established safety procedures. III. Supervisory Responsibilities This job has no supervisory duties. IV. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Education: Not required. Experience: 2 years of previous experience required. B. Certificates, Licenses, Registrations or Other Requirements Required: None C. Other Knowledge, Skills or Abilities Required Basic skills in welding techniques; knowledge of safety procedures and practices necessary while operating or repairing compactors, containers and carts; skill in operating tools equipment, parts and procedures utilized during the repair and servicing of compactors, containers and carts; skill in repair of special purpose equipment; ability to perform repairs on a variety of compactors, containers and carts; and ability to utilize fleet maintenance software program may be required. V. Work Environment Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day; Required to exert physical effort in handling objects less than __ pounds occasionally; Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) rarely; Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements rarely; Normal setting for this job is: repair/maintenance shop. Note: The level of physical effort may vary from site to site and in some cases be greater or lesser than documented here. Benefits At WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. The expected base pay range for this position across the U.S. is $20 - 28. This range represents a good faith estimate for this position. The specific salary offered to a candidate may be influenced by a variety of factors including the candidates relevant experience, education, training, certifications, qualifications, and work location. Please apply now on the site below, or call 877.220.5627, to speak with a Waste Management recruiter today Equal Opportunity Employer Minority/Female/Disability/Veteran
See More Details >>Embarking on a career as a welder in Henderson, NV typically begins with technical training, which can range from 6 months to 2 years, providing both theoretical knowledge and hands-on experience. According to the American Welding Society, the welding industry is poised for significant growth, with approximately 320,500 new welding professionals needed by 2029. In Nevada, the average welder earns around $1,445 per week, with experienced professionals potentially earning over $1,400 weekly. Training programs, apprenticeships, and certifications are available through various vocational schools and welding organizations, leading to a rewarding career with competitive wages and substantial growth opportunities.
