Position: Welder (FCAW & GTAW) Location: Camden, NJ; Advanced Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec’s rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2–4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec’s safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. • Must pass pre-employment weld tests administered in accordance with Holtec’s WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. UksyZwNlUc
See More Details >>ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. • Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met • Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society • Welding process includes: • FCAW – Flux Core Arc Welding • SMAC – Shielded Metal Arc Welding • SAW – Submerged Arc Welding • EGW – Electro Gas Welding • Automated Welding Processes • Stainless Steel Fillet Welding • Padding and preparing weld joints per WPS • Carbon Arc Gouging • Note: Not inclusive, shall be determined by vessel specification and classification rules • Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard • Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation • Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification • Welder must be able to work in a team environment • Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily • Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society • Perform other related duties as required and assigned COMPETENCIES • Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards • Flexible cooperation with team members • Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) • Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. • Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE • High School Diploma or GED • 3+ years’ work experience welding, (flux core and ceramic preferred) • Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
See More Details >>Position: Weld Engineer Place of Work: Camden, NJ; Advanced Manufacturing Division or Pittsburgh, PA; Holtec Manufacturing Division Holtec International seeks qualified Weld Engineers to join its Manufacturing Engineering team. The Weld Engineer will play a critical role in supporting production operations across Holtec's facilities by developing, qualifying, and implementing advanced welding processes and solutions. This position will be responsible for providing materials and welding engineering expertise to support design, fabrication, and troubleshooting activities related to a wide range of complex components and systems for Holtec's product lines in the nuclear, energy, and heavy industrial sectors. The Weld Engineer will work closely with design engineering, operations, quality assurance, and certified Level III personnel to evaluate and improve welding procedures, recommend materials based on design objectives, and support the resolution of production and field issues. The ideal candidates will demonstrate a high level of technical acumen, innovation, and a proactive approach to problem-solving within a fast-paced, multidisciplinary environment. Minimum required qualifications include a B.S. degree in Welding Engineering or Materials Science from an accredited institution. Minimum of 2 years of experience in welding engineering within a manufacturing or industrial environment. Working knowledge of weld symbols, fabrication drawings, and welding processes. Demonstrated ability to work cross-functionally to solve complex manufacturing challenges. Strong written and verbal communication skills, with the ability to present technical concepts clearly. Must be able to travel up to 10-20% of the time as needed. Physically able to support shop-floor operations including lifting up to 50 pounds, climbing, and working in industrial environments. Additional desirable qualifications include hands-on welding or inspection experience. Certification as a Certified Welding Inspector (CWI) is highly desirable. Familiarity with nuclear codes and standards, including ASME Section III & IX, AWS D1.1/D1.2/D1.6, and military specifications. Experience working with or supporting NDE techniques such as VT, PT, MT, RT, or DR. Specific Areas of Responsibility: Provide technically sound and cost-effective welding and materials solutions to support design, manufacturing, and repair operations. Review new product designs and recommend appropriate materials and joining techniques based on performance requirements such as strength, corrosion resistance, conductivity, weight, and cost. Support the qualification and implementation of new welding procedures, including advanced and non-traditional techniques. Plan, evaluate, and support new manufacturing projects by collaborating with design engineers, project managers, and production teams. Participating in root cause analyses of welding and materials-related failures using lab testing, product failure data, and process history. Monitor and analyze material and weld performance in service to identify potential deterioration or improvements. Support troubleshooting of welding equipment and work closely with operations to optimize welding operations. Ensure all welding activities conform to applicable codes and standards such as ASME Section III & IX, AWS D1.1, D1.2, D1.6, and MIL-STD 248/278. Prepare technical reports, budgets, weld qualification records, and engineering documentation as required. Participate in hands-on manufacturing and inspection activities, including support for NDE methods and field services. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Salary Range: $70,000-$100,000
See More Details >>Becoming a welder in Camden, NJ typically starts with technical training, which can range from 6 to 18 months, providing hands-on experience and classroom learning. According to the American Welding Society, Camden, NJ has seen a steady increase in welding job opportunities, with approximately 1,000 welders employed in the area and an average wage of $581.73 per week. The U.S. Bureau of Labor Statistics projects a 2-3% growth in the welding sector, translating to thousands of new positions annually. Trade schools and community colleges offer accessible education pathways, leading to a career with strong earning potential, often exceeding $45,000 annually for experienced professionals.
