FITTER WELDER - 2nd Shift Pay Rate: $22.51 * Anything after 8hrs, in a single day, OT is paid! * Schedule: • 2nd Shift Schedule; 3:30 p.m. - 2:00 a.m. • five 10-hour shifts (Anything after 8hrs, in a single day, OT is paid!) • two 8-hour shifts on Saturdays per month Summary of Position: Under the direction of the Department Production Supervisor and in cooperation with the Team Lead, safely erect and fit together appropriate equipment and materials for the building of asphalt plants and related components. Essential Duties and Responsibilities: • Assist in the building of asphalt plant equipment and related components by safely and efficiently fitting and welding metal parts in a quality-conscious manner. • Must be able to demonstrate ability to MIG weld, TIG weld, & stick weld (properly and safely). • Inspect metal prior to welding for smoothness & acceptability; clean welds to presentable state (grinding operations). • Ensure welding machine settings are appropriate for work to be performed. • Trained and knowledgeable in PPE requirements for welding, including hood, filter shades, & arm/body protection. • Always perform work to the utmost of one self’s ability. Continuously strive to improve one self’s work-related skills, efficiency, and the quality of output. Required Qualifications: • Ability & experience to properly & safely MIG, TIG, and stick weld. • Ability to read & understand weld symbols on drawings required. • Ability to safely use cranes & forklifts required. • Must be able to pass a welding skills test. • Fit-up knowledge & ability required. • High school diploma or equivalent certification required. • **Must be able to work overtime** Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of injury in a shop and warehouse environment and asphalt plant environment. The employee is frequently exposed to moving mechanical parts and outside weather conditions. The employee is occasionally exposed to toxic or caustic chemicals, extreme cold, and extreme heat. The noise level in the shop and asphalt plant environment is occasionally very loud. Note: This job description is intended to be a general guideline of areas of responsibility. There will be incidental tasks not listed on a job description that arise at various times. These tasks are assigned to help the department and company and, as a member of the Astec, Inc. team, each employee is expected to help in these areas. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate based on race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order. Job Type: Full-time Pay: From $22.51 per hour Benefits: • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance Experience: • MIG welding: 1 year (Required) • heavy equipment welding: 1 year (Required) Work Location: In person
See More Details >>Job Overview: We are seeking a skilled Fabricator/Welder to join our team. As a Fabricator/Welder, you will be responsible for fabricating and welding metal components according to blueprints and specifications. Tig Welding and soldering is also a plus. This is a full-time position located in Chattanooga. Responsibilities: - Read and interpret blueprints, drawings, and specifications to determine the appropriate welding process - Set up and operate welding equipment including MIG, TIG, and stick welders - Fabricate metal components using various tools and machinery such as plasma cutters, press brake machines, and pipe threading equipment - Perform welding tasks such as tack welding, soldering, and brazing - Conduct quality inspections to ensure finished products meet industry standards - Maintain a clean and organized work area - Adhere to safety protocols and wear appropriate personal protective equipment (PPE) - Collaborate with team members to complete projects on time Requirements: - Proven experience as a Fabricator/Welder or similar role - Proficient in reading and interpreting blueprints, drawings, and specifications - Strong knowledge of welding techniques including MIG, TIG, stick welding - Familiarity with operating machinery such as plasma cutters, press brake machines, and pipe threading equipment - Ability to use hand tools and power tools effectively - Basic math skills for measuring and calculating dimensions - Ability to lift heavy objects and stand for extended periods of time - Valid forklift certification is a plus If you are a skilled Fabricator/Welder looking for a challenging opportunity with room for growth, we encourage you to apply. We offer competitive pay based on experience. Note: This job description is intended to provide a general overview of the position. It is not an exhaustive list of all responsibilities, skills, duties or requirements associated with the role. Job Type: Full-time Pay: $20.00 - $28.00 per hour Benefits: • 401(k) • 401(k) matching • Dental insurance • Health insurance • Life insurance • Paid time off • Vision insurance Ability to Commute: • Chattanooga, TN 37421 (Preferred) Ability to Relocate: • Chattanooga, TN 37421: Relocate before starting work (Preferred) Work Location: In person
See More Details >>Description: Essential Duties and Responsibilities Include the following and other duties may be assigned: • Responsible for set up and operations as required by drawings to meet acceptable quality and productivity standards by either electric arc or automatic wire feed process • Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc or gas welding equipment. • Demonstrate soundness of weld joints while maintaining proper weld dimensions, heat and depth of weld to parts • Shall be subject to radiography, dye penetrant inspection or bend tests • Responsible for reading blue prints, handling materials and tools such as; tape measures, plasma cutter, cutting torches drill, bolts, clamps, etc. • Inspects parts or completed units by using visual inspection, gages, tape measures, check fixtures, calipers, or other inspection equipment. • Repairs products by dismantling, straightening, reshaping and reassembling parts. • Performs a variety of assembly or production duties with minimal supervision. • Responsible to see that all company supplied tools used are placed into proper storage cabinets daily. • Assist quality in testing and other efforts as required • Conduct rope winding as necessary • Assist and maintains acceptable performance standards for assembly, production, quality, safety, and housekeeping • Performs all other assigned duties as instructed by supervision. Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty safely and satisfactorily using good judgment. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Qualification: Sherman & Reilly Weld Certification and AWS Specification D1.1. 94 and D1.3 89 Education: High school diploma or general education degree 6 months’ experience in manufacturing environment Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Perform basic mathematical calculations at a high school level. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers. Reasoning Ability: Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving root cause and corrective action analysis. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to walk; stoop, kneel, crouch, or crawl, lay down; and talk or hear. The employee must regularly lift and/or move up to 10 pounds. The employee must occasionally lift up to 60 pounds. Specific vision abilities required by this job include close vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually loud. The temperature in the work environment is uncontrolled, so the employee is exposed to both extreme cold and hot temperatures. This Company Describes Its Culture as: Detail-oriented • - quality and precision-focused Innovative • - innovative and risk-taking Stable • - traditional, stable, strong processes People-oriented • - supportive and fairness-focused Team-oriented • - cooperative and collaborative Notice to Recruiting Agencies: Sherman + Reilly does not accept unsolicited resumes or inquiries from staffing or recruiting agencies. We will not review, respond to, or return cold calls or unsolicited outreach. Any resumes submitted without a signed agreement in place will be considered the property of Sherman + Reilly and will not be subject to any placement fees.
See More Details >>Becoming a welder in Chattanooga, TN, typically begins with technical training, which can range from 6 months to 2 years, providing both theoretical knowledge and practical skills. According to the American Welding Society, there are approximately 771,000 welding professionals in the U.S. as of 2025, with Chattanooga offering numerous opportunities for new welders. The median annual wage for welders is $45,190, with experienced welders in Chattanooga earning up to $524.50 per week. Apprenticeships and certifications, such as the Certified Welder credential, are crucial for career advancement and can lead to roles with strong earning potential, often exceeding $108,000 annually.
