GEV Wind Power is seeking a highly skilled Wind Turbine Troubleshooter Technician with comprehensive experience across multiple wind turbine platforms. This role is critical in ensuring the reliable operation of wind turbine generators through advanced troubleshooting, maintenance, and team leadership. As a Wind Turbine Troubleshooter, you will be responsible to identify common, reoccurring, and major component faults on any wind turbine generators: • Travel to various wind farm sites across the U.S. and Canada for job assignments • Troubleshoot problems on systems where duly trained/certified, including hydraulics, electrical and mechanical to ensure wind turbine and generator is operational and functioning properly • Develop advanced troubleshooting knowledge and skills on site in collaboration with other competent individuals • May perform maintenance tasks • Lead small teams; accountable for the safety, competency and productivity of individuals assigned to them • Keep records, maintains documentation and reports technical, safety issues and difficulties as required by company policy. • Maintain and follows safety procedures as required by company policy. • May assist or perform component replacement, retrofits, and other special assignments • Continue to develop and expand wind maintenance skillset through on-the-job training and train others in performing service work • Work safely, competently and productively under the direction of others Must meet the following requirements, have or obtain the listed required certifications and training (may be provided) including, but not limited to: • At least 3 years of hands-on troubleshooting experience with Siemens Gamesa (G114, G126, G132, SG145), Vestas (3.X / 4.X), or other major wind turbine models. • Citizen of or eligible to travel to and work in Canada for extended periods of time (valid passport required) • Ability to work an 8 week on, 1 week off rotation • Physically able to safely climb wind turbines up to 90m+ (300+ feet), stand, stoop, walk, crawl, crouch, stoop and generally meet the physical demands of the position. • Willingness and ability to travel extensively, including by air and ground transportation, often on short notice, and to spend extended periods away from home at project sites. • Ability to drive or travel up to 11 hours per day when required. • Able to work safely in outdoor environments under both extreme heat and cold conditions. • Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. • Must have solid knowledge of hydraulics and electrical systems • Must have maintenance experience, including knowledge of using grease guns, filter changes, using ERAD system, doing torquing and tensioning and similar service • Valid and current driving license with a satisfactory driving record • Must be 21 years of age to be able to drive a company vehicle • Must be able to proficiently read, write and speak English • Satisfactory criminal background check The following certifications are optional and considered a plus: • GWO BST (Basic Safety Training) - fire awareness, working at heights, manual handling, first aid • GWO BTT (Basic Technical Training) - electrical, hydraulic, mechanical • OSHA 10 General Industry • Applicable Siemens Gamesa Technical eLearning • Crane, Chain Hoist and Rigging Safety Training • NFPA 70E Arc-Flash Awareness • Prefer training or experience with Touchscreen Controller Hand Terminals What are the perks of working with GEV Wind Power? • Health insurance, dental, vision, disability, life, 401(k) match • 12 days paid PTO and 11 paid holidays • Upskilling trusted GEV technicians via GEV Academy • Bespoke reporting system (time saving with training provided) • Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform • We listen to our technician needs and value their feedback (consistent technician feedback surveys) • Ongoing work for our top talent A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. A career with GEV is taking ownership of the challenges we face globally and personally contributing to a positive future for us all. You will also join a dynamic and team orientated organization, where the culture is built around collaboration and driving change
See More Details >>Location: 100% travel throughout the USA Job Type: Regular Full-time or Contract positions available Job Responsibilities: • Travel 100% to wind farms throughout North America on an 8/1 rotation. • Perform composite blade repair uptower via platforms, rope access and/or occasionally on the ground • Epoxy and Polyester resin wet layup • Vacuum infusion • Balsa and foam sandwich materials • Structural repair • Completing detailed Daily Progress Reporting Documents and QAQC reports • Completing onsite stock checks • Assisting site lead and project coordinator as applicable We are ideally looking for technicians with the following skill set and training: • 2+ years of composite experience • Knowledge of epoxy and polyester resins, wet lay-up, and vacuum bag techniques. • Understanding of Epoxy and Polyester resins, wet lay-up and vacuum bag techniques • Understanding how to handle balsa and foam core materials • Knowledge of fiberglass reinforcement and structural repair methods. • Ability to safely and properly use powered hand tools. • Good finger dexterity, including precise use of hand and power tools • Ability to read and interpret complex technical drawings and processes. • IT literate, including email, internet, and iPad usage. • Ability to work well in a team, take guidance • Experience safely setting up and using 360-degree and 2M basket platforms. • Willingness and ability to travel extensively, including by air and ground transportation, often on short notice, and to spend extended periods away from home at project sites. • Ability to drive or travel up to 11 hours per day when required. • Flexibility to adapt to changes in scope and work assignments. • Able to work safely in outdoor environments under both extreme heat and cold conditions. • Physically capable of meeting strenuous job requirements, including climbing ladders 2+ times per day up to 300 feet (90 meters), bending, crawling, stooping, and lifting up to 75 pounds. • Ability to wear a respirator and work safely with protective equipment • Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. • Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle. • Valid passport is a plus. • Eligible to work in the U.S. or Canada (citizenship or legal work authorization required). • Must successfully pass a criminal background check and maintain a drug-free status. What are the perks of working with GEV Wind Power? • Health insurance, dental, vision, disability, life, 401(k) match • 12 days paid PTO and 11 paid holidays • Upskilling trusted GEV technicians via GEV Academy • Bespoke reporting system (time saving with training provided) • Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. A career with GEV is taking ownership of the challenges we face globally and personally contributing to a positive future for us all. You will also join a dynamic and team orientated organization, where the culture is built around collaboration and driving change.
See More Details >>We are seeking a highly skilled and safety-conscious GE LOTO Certified Technician to join our dynamic team at GEV Wind Power U.S. In this critical role, you will travel extensively across the country to wind farm sites, applying your expertise in Lockout/Tagout procedures to support blade repair operations on GE turbines. Your focus on safety, teamwork, and operational excellence will ensure efficient, high-quality service delivery in challenging environments. If you thrive in a fast-paced, hands-on role and are passionate about renewable energy, this is the opportunity for you. Job Responsibilities: • Travel 100% to wind farms throughout North America on an 8/1 rotation. • Perform blade LOTO duties for GE wind turbines in support of blade repair operations • Monitor confined space operations for internal blade repair work • Assist the Blade repair team, who is primarily responsible for all work completion, either at height or on the ground • May need to interface with the customer on site • Assist in the operation of the basket, rigging/de-rigging blade access platform, and perform tag-lining • Help the team solve problems related to the work scope • Assist in maintaining organized on-site supply inventory during repair operations • Miscellaneous operations support tasks as required by team leader • Provide quality customer service and site rules and pay attention to detail • Professional conduct both on and off site; care for company property and interests • Maintain personal, team and site safety • Be a team player for a diverse team We are ideally looking for technicians with the following skillset and training: • Must be able to successfully work in a fast-paced, team environment, regularly think critically and be a problem-solver • Must already have a current GE LOTO Certificate (NAM Blade LOTO, NAM Tech Essentials or RELC Tech Essentials) and be able to provide proof of a certification • Must be a GE Qualified Electrical Worker 1 • Must have, or will be trained in, GWO Basic Safety Training, OSHA 10, NFPA 70-E, Confined Space • Ability to safely and correctly use powered hand tools • Prefer knowledge of composite blade repair specifications and techniques (but not required) • Prefer ability to read complex technical drawings and processes • IT literate (email, internet, iPad) • Willingness and ability to travel extensively, including by air and ground transportation, often on short notice, and to spend extended periods away from home at project sites. • Ability to drive or travel up to 11 hours per day when required. • Must be flexible for changes of scope and schedule • Ability to work well as a team and take guidance • Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle. • Must be able to meet the strenuous physical requirements of climbing ladders 2 or more times per day up to 300 feet/90 meters, bend, crawl, stoop and lift up to 75 pounds. • Ability to wear a respirator and work safely with protective equipment • Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment. • US/Canadian citizens or legal to work in either country are eligible for the opportunity The following certifications are optional and considered a plus: • GWO BST (Basic Safety Training) – fire awareness, working at heights, manual handling, first aid • GWO BTT (Basic Technical Training) – electrical, hydraulic, mechanical • IRATA or SPRAT rope access experience and certification is a plus; certificate must be current, and candidate must be physically capable of performing rope access work safely. • OSHA 10 General Industry • GE NAM Blade LOTO certificate What are the perks of working with GEV Wind Power? • Health insurance, dental, vision, disability, life, 401(k) match • 12 days paid PTO and 11 paid holidays • Upskilling trusted GEV technicians via GEV Academy • Bespoke reporting system (time saving with training provided) • Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform • We listen to our technician needs and value their feedback (consistent technician feedback surveys) • Ongoing work for our top talent A little bit about us: A Career Enabling You to Make a Global Impact! You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources. At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity. A career with GEV is taking ownership of the challenges we face globally and personally contributing to a positive future for us all. You will also join a dynamic and team orientated organization, where the culture is built around collaboration and driving change
See More Details >>Entering the Wind trade typically begins with specialized training and apprenticeships, combining hands-on experience with technical education, allowing individuals to gain practical skills while learning the necessary theoretical knowledge. Apprenticeships in the wind energy sector can last about two to three years, requiring extensive on-the-job training and education in wind turbine technology. According to the U.S. Bureau of Labor Statistics, the wind energy sector is projected to grow by 60% from 2023 to 2033, with a significant portion of this growth occurring in regions like Garden City, KS. Apprentices in wind energy can earn an average of $1,200 per week in Kansas, with experienced professionals often exceeding $60,000 annually. Vocational schools, industry associations, and platforms like Stream Marine Training help aspiring wind energy technicians find apprenticeship opportunities, leading to a career with strong earning potential and significant growth opportunities.
