Description: Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client’s property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. • Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. • Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Requirements: Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training: • Technical Trades School in Welding • High school GED Required Experience: • 1+ years of welding experience. Other: • Must be willing to work overtime as required. • Minimal travel may be required Work Authorization: Must be able to work in the U.S without sponsorship.
See More Details >>Job Type Full-time Description Job Title: Welder Reports To: Manufacturing Supervisor FLSA Status & EEO Code: Hourly Non-Exempt & Operatives Division/Department: Manufacturing Level of Work: I Position Summary: Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires a broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed a. Working from drawings, specifications, manuals, codes, etc., sets up welding equipment and obtains electrodes and other necessary equipment for specified job or subassembly. b. Investigates special welding instructions to conform to Quality Assurance requirements. c. Slag work; examines weld for size of bead, penetration and quality continuous code welding and testing. d. Visually examines completed weld for size of bead, penetration and quality. e. Understand and work with complicated standards or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. f. In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. g. Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. h. Uses an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions i. Consistently meets customer's quality requirements and expectations. Follow instructions - oral and/or written a. Can properly read all blueprint and work instructions b. Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. c. Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. Safety & housekeeping a. Work may require use of scaffold, ladders, forklift, and/or scissor lift. b. Work may require the use of a crane to move part. c. Maintains a clean work area with no clutter. d. Practices safety at all times while at work. e. Follows safety policies and procedures and speaks up when others are non-compliant. f. Wears all safety equipment for area of work. Continual Improvement suggestions a. Keeps an open mind to others continuous improvement suggestions b. Bring continuous improvement suggestions to the appropriate team member. Professional Development a. Demonstrates initiative, positive attitude, and enthusiasm for the job b. Will follow up with supervisor on professional development goals and opportunities c. Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training • Technical Trades School in Welding • High school GED Required Experience: • 1+ years of welding experience. Other: • Must be willing to work overtime as required. • Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: 1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. 2. Strong organization and time management skills. 3. High attention to detail. 4. Demonstrate behavior consistent with company values. 5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. 6. Exhibits polite and professional communication via phone, e-mail and mail. 7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. 8. Maintain a collaborative relationship with internal and external stakeholders. 9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. 10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. 11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. 12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. 13. Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. • Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. • Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $15.00-22.00/hour
See More Details >>Graham Corporation is a great place to work with excellent benefits! Graham currently offers fully company paid Medical Insurance, Life Insurance and Long Term Disability. We also offer Dental & Vision Insurance and Supplemental Life Insurance you and your family. There is a very generous 401k match with no vesting schedule, 11 paid Holidays, a yearly company paid defined contribution and an Employee Stock Purchase Program. SUMMARY: • Performs all position welding on an assortment of structures and weldments in accordance with code requirement, alignments and dimensional specifications. Requires broad knowledge of welding technology in addition to extensive welding experience, fulfills ASME Section IX welding qualifications. Reports directly to Production Supervisor, Weld Shop or his/her designee. • This position is for 2nd shift. you will need to be available to train on first shift for 6 months to a year. Additional $1.75 per hour shift differential when transferred to 2nd shift. JOB DUTIES: • Working from drawings, specifications, manuals, codes, etc., set up welding equipment and obtain electrodes and other necessary equipment for specified job or subassembly. • Investigate special welding instructions to conform to Quality Assurance requirements. • Slag work; examine weld for size of bead, penetration and quality continuous code welding and testing. • Visually examines completed weld for size of bead, penetration and quality. • Strong backs, complicated standard or special structures and weldments involving a number of parts and details, using clamp, tack weld, jigs, fixtures, and turning rigs. • work may require use of scaffold and ladders. • In preparation of surfaces to be welded, will use a variety of tools such as grinder, chippers and arc gouging equipment. • Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. • Use an assortment of measuring tools such as straight edge, tape, welding gauges, etc. to ensure proper weld dimensions. • Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. • Performs other duties as assigned by Production Supervisor, weld shop, or his/her designee. WORKING CONDITIONS: May be required to move items up to 60 pounds for distances of up to 10 feet. May be required to stand, stoop, bend, kneel and squat for extended periods of time. May be exposed to fumes or dust, toxic or caustic chemicals, outdoor weather, moving mechanical parts and moderate to loud noise levels. Must wear appropriate protective gear and clothing as necessary. EDUCATION AND EXPERIENCE REEQUIRED: • High School Diploma/GED Required • BOCES, or Trade School education supplemented by special study or on the job training to receive certification for all welding processes and procedures used on company products. • Proficiency test applies. SECURITY CLEARANCE: Please be aware that many of our positions require a security clearance, or the ability to obtain one. Security clearances may only be grated to U.S. Citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Graham Corporation is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status or membership in any other group protected by federal, state or local law. BENEFITS: • 401(k) • 401(k) Matching • Dental & Vision Insurance • Employee Assistance Program • Health Insurance • Health Savings Account • Life Insurance • Paid Time-Off • Parental Leave Education Required • Technical/other training or better • High School or better Behaviors Preferred • Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well • Team Player: Works well as a member of a group Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
See More Details >>Becoming a welder in Batavia, NY, typically begins with an apprenticeship, combining hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about four to five years, requiring many hours of training under licensed professionals. According to the American Welding Society, there are approximately 771,000 welding professionals in the U.S., with projections indicating a need for 320,500 new welders by 2029. Welders in New York earn an average of $1,100 per week, with experienced professionals often exceeding $45,000 annually. Trade schools, unions, and platforms like AWS help aspiring welders find apprenticeship opportunities, leading to a career with strong earning potential.
