Job Summary: Plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Essential Duties & Responsibilities: • Include the following. Other duties may be assigned. • Reads and interprets blueprints, sketches, or project specifications to determine sequence and methods of fabricating, assembling, and installing products, materials, and equipment required to complete project to which the mechanic is assigned. • Selects appropriate materials and method of installation, according to project specifications. • Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts or uses templates. • Sets up and operates fabricating machines, tools, and equipment as necessary to promptly and accurately complete installation of work. • Installs work according to blueprints and in conformance with specifications. • Works with project manager and field superintendent to ensure that work is installed according to schedule and that quality is maintained. • Maintains accurate job log of construction activities and any other required project documentation. • Ensures that assigned crew accurately completes timesheets and sees that they are forwarded to Payroll Coordinator in a timely fashion. • Oversees, instructs, and mentors new employees, especially helpers, to help them advance within the company, realize their full potential, and contribute to the success of the project and the company. • Compiles with company policies and procedures, especially safety rules. • Repairs and maintains sheet metal products. Qualifications: • Minimum of 4–6 years of commercial or industrial sheet metal experience. • Proficient in reading blueprints, layouts, and mechanical drawings. • Ability to fabricate, assemble, and install rectangular, round, and oval duct systems per SMACNA standards. • Knowledge of duct pressure classifications and proper sealing and support methods. • Competent in using hand and power tools such as snips, drills, nibblers, crimpers, and impact drivers. • Capable of field measuring, ordering ductwork, and performing air leakage testing. • Strong commitment to safety and compliance with OSHA 10 or OSHA 30 certification. • Reliable attendance, good communication, and ability to work independently or lead a small crew. Work Environment: While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance, talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to moving mechanical parts and high, precarious places.
See More Details >>Job Summary Responsible for Sheetmetal construction field installation activities with an emphasis on labor productivity, quality, timely installations, and teamwork. This requires close coordination with the project team. The position is also responsible for jobsite safety. Essential Duties & Responsibilities • Follows all rules and procedures required by SPC; ensures Sheetmetal staff follow procedures and policies. • Communicates with contractors on various projects to ensure they achieve quality work in a timely manner. • Communicates with SPC staff and provides feedback to staff regarding the status of the project. • Instructs Sheetmetal staff in the techniques and procedures employed in the Sheetmetal trade. • Plans, assigns, and reviews the work of the Sheetmetal staff engaged in the installation, modification, and/or repair of Sheetmetal systems. • Inspects work upon completion to determine that staff followed the necessary operations and that work conforms to specifications. • Acts as a working supervisor in cutting, assembling, and installing ductwork, including: • Single and double wall round and flat oval spiral or flanged • Standing S, slip and drive rectangular or round snap lock • Flexible duct • Capable of sealing the duct to achieve the specified duct sealing requirements. • Good understanding of duct pressure classifications. • Capable of performing HVAC air duct leakage tests with little assistance. • Ability to field measure and order duct. • Assist with daily reports. Qualifications • Minimum of 10 years industrial/commercial Sheetmetal experience. • Ability to read and interpret documents. • Ability to write routine reports and correspondence. • Ability to solve practical problems and deal with a variety of variables in situations. • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schematic form. • Ability to work with mathematical concepts such as probability, statistical inference, and the fundamentals of plane and solid geometry. • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Tools Required • Reciprocating Saw (Cordless) • Nibblers (Cordless) • Impact Drill (Cordless) • Drill / Driver (Cordless) • Sheetmetal Hammer • Right and left-handed snips • Duct Tongs (Benders) • Duct Crimper • Bill Dog Snips • Screwdriver Set • Tape Measure • Torpedo Level and Two Foot Level • Magnetic Hex Drivers ¼” – 3/8” • 12” Folding Tool • Tie Banding Tool for Plastic Straps • Divider (for measuring circles and drawing fittings) • Duct Knife (for insulation) • Wire Cutters (Side Cutters) Work Environment While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and the risk of electrical shock. The employee is occasionally exposed to high, precarious places, outside weather conditions, and vibration/loud noise. The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel, reach with hands and arms, climb or balance, stand, walk, sit, stoop, kneel, crouch, or crawl, and talk or hear. The employee must frequently lift a
See More Details >>Job Summary: The Sheetmetal Helper supports field operations by assisting mechanics with the positioning, alignment, and assembly of sheet metal systems and related components. This role involves handling tools and materials, aiding in layout and installation tasks, and maintaining a clean, organized, and safe work environment. The Helper is expected to anticipate the needs of the mechanic, ensure proper use and storage of equipment, and perform routine duties that contribute to overall project efficiency. The ideal candidate demonstrates initiative, reliability, and a strong willingness to learn, while consistently adhering to company policies, safety standards, and quality expectations. Physical stamina and the ability to work in outdoor and elevated conditions are essential. Essential Duties & Responsibilities: • Holds, positions, and reads tape to assist in layout. • Places and moves, equipment and materials. • Positions and turns clamps; screws, bolts, and hammers together; uses tools and equipment properly and only if certified (as required). • Transports and furnishes mechanics with materials, tools, and supplies. • Cleans work area, machines, tools, and equipment; ensures that tools, equipment, and materials are stored properly and securely. • Performs other routine duties. • Comply with company policies and procedures, especially safety rules. • Ability to inspect tools. • Ability to anticipate what mechanic needs next. • Sheet metal Hammer • Right and left-handed snips • Screwdriver set • Tape Measure 25' Qualifications: • Two to three years of experience. • Willingness to learn. • Willingness to install different sheet metal systems. • Reliable attendance and punctuality • Positive attitude and keeps a good morale on-site • Has Hand tools to perform the task • OSHA 10 Tools Required: • Sheet metal Hammer • Right and left-handed snips • Screwdriver set • Tape Measure 25' Work Environment: While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance, talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to moving mechanical parts and high, precarious places
See More Details >>Becoming a sheet metal worker in Durham, NC, typically begins with an apprenticeship, which combines hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about three to five years, requiring many hours of training under licensed professionals. The U.S. Bureau of Labor Statistics reports approximately 126,200 sheet metal workers nationwide, with an average hourly wage of $21.23, translating to about $849 per week. Trade schools, unions, and platforms like Guild help aspiring sheet metal workers find apprenticeship opportunities, leading to a career with strong earning potential—often exceeding $56,000 annually for experienced professionals.
