Local manufacturer in need of mig welders for construction of shipping container build out projects. Must have Mig welding frame experience, plasma cutting and grinding. Must be able to come in for a welding test prior to being hired.
See More Details >>Company Overview: Waste Management assures its dedication to offering secure, dependable, and top-notch maintenance solutions. In the role of a Welder within our workforce, your responsibilities will involve on-site tasks such as the installation, maintenance, and fixing of waste compactors. This job supports the enhancement of operational effectiveness and safety measures, while also providing avenues for career growth through various training and certification programs. Role and Responsibilities: As a Maintenance Welder, your responsibilities will include conducting welding, electrical, and hydraulic maintenance on waste compactors at client sites. You will also be tasked with fabricating metal parts when necessary, as well as carrying out inspections to guarantee the safe and effective operation of the machinery. • Carry out the installation, maintenance, and fixing of waste compactors at client sites. • Conduct regular maintenance tasks such as inspections, lubrication, and replacing hydraulic fluids. • Inspect units for stress fractures and potential safety risks. • Perform necessary repairs on electrical connections, circuits, solenoids, pressure switches, and wiring when required. • Use gauges to manipulate the operation of equipment and modify the pace of cycles. • Install and exchange complete units utilizing the correct tools. • Construct hoppers, chutes, platforms, stairs, and guardrails. • Evaluate, diagnose, and fix hydraulic tubes and mechanisms. • Carry out necessary maintenance duties on location as needed. • Restore items by disassembling, aligning, reforming, and reconstructing components with manual tools and cutting implements. • Drive the service truck safely to and from designated service points. • Provide guidance to on-site staff regarding correct operational protocols and verify compliance with safety regulations. Necessary Qualifications and Expertise: • Two years of prior involvement in welding, electrical, or hydraulic tasks is required. • Proficiency in interpreting electrical and hydraulic diagrams. Preferred Qualifications: • Possession of a high school diploma from an accredited institution or an equivalent GED credential is required. • Skill in stick/MIG welding and operation of yellow machinery. • Proficiency in operating and troubleshooting three-phase electric motors and general electrical circuits. • Knowledge of hydraulics. Work Environment: • Necessary to utilize fine finger movements and motor coordination throughout the majority of the workday. • Occasionally manipulate items weighing under 30 pounds and engage in physical activities. • Exposure to workplace hazards like lacerations, scalds, or hazardous substances can happen from time to time. • Outdoor work in compactor repair environments involves exposure to dirt, smells, loud noises, and various weather conditions. Compensation and Benefits: • The salary range is between $19.00 and $25.00 hourly, depending on the level of expertise. • First Shift: Monday through Friday, starting at 7:00 AM and ending at 3:30 PM. • Additional monetary rewards are available for individuals attaining ASE certifications, Engine certifications, and CDL qualifications. • Yearly Tool Grant and Yearly Boot Grant. • Comprehensive total remuneration plan encompassing Medical, Dental, Vision, Life Insurance, and Short Term Disability benefits. • The Stock Purchase Plan allows employees to buy company shares at a discount, while the 401(k) Company match program involves the employer contributing funds to match a portion of the employee's retirement savings. • Paid time off, including vacation, holidays, and personal days, is provided by the employer. About Waste Management: Waste Management prioritizes stability, career advancement, and the welfare of its employees. The company's ethos underscores the importance of safety, collaboration, and continuous professional growth. Staff members can take advantage of educational support, extensive health benefits, a matching 401(k) plan, stock incentives, childcare assistance, and avenues for career progression.
See More Details >>**I. Job Summary** Installs, services, and repairs refuse compactors at the customer's location. • *II. Essential Duties and Responsibilities** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. + Must have general welding, electrical and hydraulic skills and must be able to fabricate metal on site as needed; must also be able to read electrical and hydraulic schematics. + Performs routinely scheduled services to the refuse compactor at the customer's locations. Inspects, greases, changes/filters hydraulic oil, and changes filters on the refuse compactors. Adds hydraulic oil as needed. + Checks the units for stress cracks and other safety hazards. + Checks the electrical connections, replaces the circuits, solenoids and pressure switches and repairs wiring as needed. + Operates the units, checks the pressure with a gauge and adjusts the cycle speed as needed. + Installs and replaces total units. + Uses a hammer drill to anchor the units and mount the guard rails. + Fabricates hopper, shoots, platforms, steps and handrails. + Tests, diagnoses and repairs hydraulic hoses and systems. + Performs service calls to make site repairs. + Repairs products by dismantling, straightening, reshaping, and reassembling parts using a cutting torch, porta-power, sledge hammer, and hand tools. + Maneuvers the service truck safely to and from the service location. + Instructs site personnel on the proper operational procedures and has a safety standard sheet signed by the site supervisor. • *III. Supervisory Responsibilities** This job has no supervisory duties. • *IV. Qualifications** The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience + Required: Two years previous experience. + Preferred: High school diploma or G.E.D (accredited) B. Certificates, Licenses, Registrations or Other Requirements + None required. C. Other Knowledge, Skills or Abilities Required + None required. • *V. Work Environment** Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. + Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day; + Required to exert physical effort in handling objects less than 30 pounds occasionally; + Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally; + Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally; + Normal setting for this job is: outside/compactor repair. The expected base pay range for this on-site position is $19 - $25. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate’s relevant experience, education, training, certifications, qualifications, and work location. • *Benefits** At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click "Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran • *I. Job Summary** Installs, services, and repairs refuse compactors at the customer's location. • *II. Essential Duties and Responsibilities** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. + Must have general welding, electrical and hydraulic skills and must be able to fabricate metal on site as needed; must also be able to read electrical and hydraulic schematics. + Performs routinely scheduled services to the refuse compactor at the customer's locations. Inspects, greases, changes/filters hydraulic oil, and changes filters on the refuse compactors. Adds hydraulic oil as needed. + Checks the units for stress cracks and other safety hazards. + Checks the electrical connections, replaces the circuits, solenoids and pressure switches and repairs wiring as needed. + Operates the units, checks the pressure with a gauge and adjusts the cycle speed as needed. + Installs and replaces total units. + Uses a hammer drill to anchor the units and mount the guard rails. + Fabricates hopper, shoots, platforms, steps and handrails. + Tests, diagnoses and repairs hydraulic hoses and systems. + Performs service calls to make site repairs. + Repairs products by dismantling, straightening, reshaping, and reassembling parts using a cutting torch, porta-power, sledge hammer, and hand tools. + Maneuvers the service truck safely to and from the service location. + Instructs site personnel on the proper operational procedures and has a safety standard sheet signed by the site supervisor. • *III. Supervisory Responsibilities** This job has no supervisory duties. • *IV. Qualifications** The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience + Required: Two years previous experience. + Preferred: High school diploma or G.E.D (accredited) B. Certificates, Licenses, Registrations or Other Requirements + None required. C. Other Knowledge, Skills or Abilities Required + None required. • *V. Work Environment** Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. + Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day; + Required to exert physical effort in handling objects less than 30 pounds occasionally; + Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) occasionally; + Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally; + Normal setting for this job is: outside/compactor repair. The expected base pay range for this on-site position is $19 - $25. This range represents a good faith estimate for this position. The specific salary offered to a successful candidate may be influenced by a variety of factors including the candidate’s relevant experience, education, training, certifications, qualifications, and work location. • *Benefits** At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click "Apply. Equal Opportunity Employer: Minority/Female/Disability/Veteran
See More Details >>Becoming a welder in Rome, NY, typically begins with technical training, which can range from 6 months to 2 years, providing hands-on skills and theoretical knowledge necessary for the trade. According to the American Welding Society, the welding industry is expected to need approximately 320,500 new welding professionals by 2029, with a steady demand for skilled welders. In Rome, NY, welders can expect to earn an average wage of $1,500 per week, with potential for higher earnings through overtime and specialized skills. Training programs and apprenticeships are available through local trade schools and welding unions, offering pathways to a stable and lucrative career in the welding trade.
