Pipefitter – 1st Class A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications. The Pipe Fitter journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Long term project Housing assistance available Great Hours with overtime pay M-Th = 10 hours / Fri = 8 hours PLUS some Sats & Sun Per-diem available for those that qualify Call Clara for full details – (787) 360-2397 Se Habla Español – Pipe fitters para proyecto en Florida QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence. 2. Must have a comprehensive knowledge of ship construction. 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action. 5. Must have a thorough knowledge of experience with P-73 joint fit-up. 6. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals. 7. Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting. 8. Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work. 9. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems. 10. Must at have at least Three (3) years of pipefitting shipyard experience.
See More Details >>• Position Title: Pipe Fitter • Position Location: US Virgin Islands • Industry Type: Mechanical/Commercial New Construction • Position Type: Full-Time • Position Pay: $30.00-$38.00 (Based On Experience) A mechanical contractor with over 50 years of business experience has an opening for an experienced mechanical pipefitter in the Caribbean. JOB SUMMARY: Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, and sprinkling, in mechanical construction. JOB REQUIREMENTS: • For consideration, candidates must have at least 5 years of pipefitting experience in mechanical construction. ESSENTIAL FUNCTIONS: • Cut and thread pipe to specifications, using tools such as saws, cutting torches, and pipe threaders. • Must follow the direction of the project supervisor. • Attach pipes to walls, structures, and fixtures using brackets, clamps, and tools. • Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by brazing, cementing, soldering, pressing, and threading joints. • Inspect, examine, and test installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods. • Measure and mark pipes for proper installation. • Lay out of pipe systems, supports, and related equipment, following plans, details, and specifications. • Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications and details. • Other duties as assigned. REQUIREMENTS: • Must be able to live and work in the Caribbean. • Must be able to use an Oxygen and Acetylene Torch to cut steel pipe • Must always put SAFETY FIRST. • Must be 18 years of age or older. • Must be able to lift 50lbs. unassisted • Must be able to perform multiple tasks safely and with quality. • Must be able to work inside and outside. • Must be able to work at various heights above the floor with a ladder, scaffold, and man-lift when required. • Must be able to work in excavated trenches. • Must own all hand tools needed to perform as a pipefitter as described in the tool list. • Must have knowledge of the piping system being installed (chilled water, heated water, steam, condensate, etc.). • Must understand construction terms. • Must be able to work overtime as required. BENEFITS: • Airfare To The Caribbean Islands • Arrangements For Tools To Be Shipped • Housing [Apartment or Condo] • Paid Utilities • Transportation • Company Vehicle (If Applicable) • [Benefits] • Employee Ownership Opportunities • Paid Vacation & Holidays • Health, Dental, & Life Insurance • 401k Plan • Company Bonuses • Project Management Training Programs Available • Educational Reimbursement Available • Opportunities For Advancement Equal Opportunity Employer An Equal Opportunity Employer
See More Details >>Looking for an experienced HVAC Pipefitter for various pipe equipment and systems installations. Responsibilities • Measuring and marking of pipes for cutting and threading. • Assembly and welding pipe components and systems per project specifications. • Securing pipes to walls and ceilings with proper brackets, clamps, etc. • Ordering required materials (piping, supports, etc.) • Cleaning of pipe systems (chemical flushing). • Inspect pipes testing for pressure and leaks, report or resolve problems. • Installation adhering to local codes and equipment clearances. • Coordination with other trades. • Perform other related duties as assigned. Required Skills/Abilities • Past experience with Mechanical Contractor • Blueprint reading capabilities. • Ability to use various tools including saws, pipe benders, welding torches. • Excellent organizational skills. • Strong analytical and problem-solving skills. • Prolonged periods of standing and stretching to install and repair pipes and pipe fittings. Experience • Successful completion of apprenticeship that included classroom and on-the job- instruction. • Several years of pipefitting experience • State Licensed or Certification Job Type: Full-time Pay: $25.00 - $32.00 per hour Benefits: • 401(k) • Health insurance • Paid time off Schedule: • Monday to Friday • Weekends as needed Ability to commute/relocate: • Miami, FL: Reliably commute or planning to relocate before starting work (Preferred) Experience: • Welding: 3 years (Preferred) Work Location: In person
See More Details >>Embarking on a career as a pipefitter in Miami, FL typically begins with an apprenticeship, blending hands-on experience with classroom instruction, enabling individuals to earn while they learn. Apprenticeships span approximately four to five years, demanding extensive on-the-job training under seasoned professionals. According to the U.S. Bureau of Labor Statistics, there are 89,141 pipefitters nationwide, with an average weekly wage of $1,221.17 in Miami. The industry projects a 6% job growth from 2023 to 2033. Aspiring pipefitters can find apprenticeship opportunities through trade schools, unions, and platforms like Guild, leading to a lucrative career with potential earnings often exceeding $63,992 annually for experienced professionals.
