Job Description Here at BAE Systems, Pipe Fitters are assigned to remove, target, fabricate, repair, install system per drawings and test marine piping systems onboard ships in various stages of repair and modernization. Pipe Shop mechanics perform a variety of skilled duties such as general pipe fitting, burning/brazing, use of various mechanical attached fittings (MAF), sketching and testing of various piping systems in shop or onboard the vessel. Pipe Shop employees must be able to interrupt and follow all basic PPE Requirements, Safety Policies and Procedures put out by BAE. • Install, test, and maintain piping systems, including fuel, water, and hydraulic systems • Read and interpret blueprints, diagrams, and specifications to determine piping system requirements • Remove, target and fabricate new piping spools/assembly sections from existing conditions • Cut, thread, and bend pipes to fit specific measurements and angles • Assemble and connect pipes, fittings, and valves using various techniques, such as welding, soldering, and brazing • Test piping systems for leaks and other defects • Repair and replace damaged or corroded pipes, fittings, and valves • Collaborate with other tradespeople, such as welders and electricians, to ensure proper installation and functioning of piping systems • Troubleshoot and diagnose problems with piping systems • Perform routine maintenance tasks, such as cleaning and inspecting pipes and fittings Required Education, Experience, & Skills • Must be able to read, write, comprehend simple instructions and apply common sense understanding to carry out instructions in written, oral or diagram form. • High School Diploma or 5+ years of experience in pipe fitting or a related trade • Knowledge of piping systems, materials, and installation techniques • Identification of piping by class, schedule, size and the system they are used on • Ability to read and interpret blueprints and diagrams • Physical stamina to work in a fast-paced, demanding environment • Ability to work at heights and in confined spaces • Have the basic Pipe Fitting tools required to complete daily task • Must be able to wear applicable PPE (Hard Hat, Safety Glasses, Gloves, Steel Toe/Metatarsal Boots, Hearing Protection) • Must be able to obtain and maintain Defense Biometric Identification System (DBIDS) access card. Preferred Education, Experience, & Skills • 5 years or more experience/pipe fitting apprenticeship program • Pipe fitting and installation techniques • Welding, soldering, and brazing techniques • Blueprint reading and interpretation • Troubleshooting and problem-solving • Communication and teamwork skills • Physical stamina and dexterity Pay Information Full-Time Salary Range: $44720 - $78520 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it’s what we do at BAE Systems. Working here means using your passion and ingenuity where it counts – defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team—making a big impact on a global scale. At BAE Systems, you’ll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.
See More Details >>Come and be a part of a GREAT company! Stellar Energy provides excellent benefits and programs such as: • Retention Bonuses – Quarterly bonuses in the amount of $300.00 • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. • 3-Weeks Paid Time-Off. • 10-Paid holidays a year. • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly. • Baileys Gym Membership • Tuition Assistance • 2nd Shift Differential – 6% Pipe Fitter Position Type: Full-time, Exempt, Salary Reports to: General Superintendent Supervisory Responsibility: None Location: Jacksonville, FL ________________________________________ Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective To have experienced working knowledge of mechanical equipment and piping installation and the various terminologies, blue print reading, measurement’s, setting equipment/piping, job specifications, etc., to build an integrally complete piping system. Essential Functions • Fluent in understanding job specification, blue print reading, target point measurements and torque requirements for large industrial piping systems. • Hands on working knowledge of datum lining, Equipment/Piping center lines and work points. • Technically proficient in the installation of various valves, suction diffusers, guides, circuit setters, expansion tanks, pumps, chillers, automatic air vents, pressure regulators, etc. to make a complete piping system. • Installation knowledge of all forms of piping system hangers, supports, braces, etc., from temporary through jam nut completion. • Strong mechanical aptitude and problem solver who can understand and follow instruction. • Accountability for completion of daily work assignments while monitoring quality, safety and health regulations. • Documentation of all quality reporting methods employed per SEA Quality Standards • Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. • Safely and efficiently direct and monitor two or more helpers. • Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. • Be fluent in all hydro process for 150psi testing and inspections. • Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Collaboration Skills • Reliable Attendance • Decision Making • Leadership • Communication Proficiency; Written and Verbal • Ethical Conduct • Problem Solving • Organizational Skills • Thoroughness • Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Occasional evening and weekend work may be required as job duties demand. Payrate Starting at $29 / hourly Required Education and Experience • High school diploma or GED • Knowledge of Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting Preferred Education and Experience • A minimum of 2-5 years related experience or training Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ________________________________________ Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
See More Details >>JOB TITLE PIPE FITTER 2/C LOCATION FLORIDA - JACKSONVILLE, FL 32206 US (Primary) JOB TYPE Full-Time JOB CLASSIFICATION Hourly EXEMPTION TYPE Non-Exempt EDUCATION High School Diploma/GED JOB DESCRIPTION JOB SUMMARY: A pipefitter who has 2 to 3 years of experience with laying out, assembling, installing, and maintaining pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating , sprinkling, and industrial production and processing systems as required for new construction or maintenance, applying knowledge of system operation and following blueprints with the use of periodic supervision and while always adhering to industry safety standards. ESSENTIAL FUNCTIONS: 1. Selects type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications 2. Inspects work site to determine presence of obstructions and to ascertain that holes cut for pipe will not cause structural weakness 3. Plans installation or repair to avoid obstructions and to avoid interfering with activities of other workers 4. Cuts, threads and bends pipe 5. Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings including: iron, steel, copper and plastic 6. Connects pipe using threaded, caulked, soldered, brazed, fused, or cemented joints 7. Secures pipes to structure with brackets, clamps, and hangers 8. Installs and maintains hydraulic and pneumatic components of machines and equipments such as pumps, and cylinders 9. Follows lockout/tagout procedures to shut down equipment according to OSHA requirements and company safety rules 10. Sets up and operates various pipe cutting, bending, and threading machinery 11. Bends, cuts, threads, shapes, fabricates, and installs pipe according to job specifications 12. Cuts and bores holes in structures such as walls and fixtures before pipe installation; attaches pipes to walls and structures 13. Installs various types of installation and pipe covering; removes and disposes of old coverings in line with the company hazardous waste procedures and EPA and OSHA requirements 14. Makes hydraulic pressure test of piping installations. Checks and adjusts controls, gauges, and valves to achieve control of flow or pressure 15. Inspects and maintains facility piping systems, heating, refrigeration, and air conditioning systems, water treatment and sewer systems, and burners and heaters. Reports deficiencies and corrects problems 16. Posts and keeps up to date records of piping systems and controls. Posts records of safety checks and inspection dates of assigned equipment 17. Performs other duties as assigned KNOWLEDGE, SKILLS, AND ABILITIES: 1. Replace existing piping systems to original design and pressure requirements 2. Install new piping systems using NavSea Drawings and Tech Manuals 3. Effective planning and layout skills to minimize material waste 4. Skilled use of power tools and machinery associated with pipe fitting 5. Effective level of skill in blueprint reading and material requirements 6. Good knowledge of joint design and fit up requirements IAW Mil-Std 22D 7. Knowledge of requirements for pipe bending IAW Mil-Std 1627C 8. Effective at setting up hydrostatic testing equipment to shipboard and shop piping systems, including trouble shooting 9. Good knowledge of QA requirements and checkpoints 10. Knowledgeable at recognizing and resolving problems encountered while making shipboard piping runs, i.e. interference, existing piping damage, valve leak by etc. 11. Knowledgeable of material requirements, pipe/fitting size identification, pressure requirements 12. Knowledge of piping support and hanger spacing requirements 13. Qualify as a tack welder 14. Ability to use and read calibrated measuring equipment, (micrometers, 0-6" dial calipers, etc.) 15. Effective ability to setup and use power tools, (threader, bender, hydro pump, etc.) 16. Good Knowledge of hand tools and usage 17. Good knowledge of power tool safety and inspection prior to use 18. Proper procedures for running gas and electrical leads, (drop test, chaffing at doors and accesses, etc.) 19. Effective knowledge of piping systems and their hazards, (CHT, Fuel, O2, Hydraulics, etc.) 20. Effective knowledge of system requirements such as cleaning and draining prior to breaching or opening system 21. OSHA and shipyard requirements prior to commencing work on any piping system 22. Good knowledge of Std Items for welding, testing, maintaining cleanliness, etc. 23. Good working knowledge of NSTM Chapter 505 for piping systems 24. Ability to initiate WAF's 25. Ability to submit hot work JOB REQUIREMENTS QUALIFICATIONS: 1. High school diploma or GED and 2 to 3 years of related experience in field or equivalent combination of education and experience in field 2. Ability to gain access to military installations 3. Must pass drug test and background check PHYSICAL REQUIREMENTS: 1. Ability to lift 50 pounds regularly and seek help with weights over 50 pounds 2. Ability to sit and/or stand for long periods of time. While performing the duties of this job, the employee is required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs/vertical ladders; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This is a physically demanding position and may accommodate some physical disabilities. Physical dexterity may be required when performing walk thru and inspection of job sites. In the performance of the walk thru you will be required to transverse steep stairwells, vertical ladders and bending or stooping thru tight spaces. There may be occasional lifting of materials weighing not more than 50 pounds. ENVIRONMENTAL CONDITIONS: This position works on the jobsite. There is exposure to hostile environments, loud noises, hazardous chemicals/fumes and airborne particles, smoke, extreme temperatures moving mechanical parts: high, precarious places. During work-site visits will be required to wear appropriate PPE including, but not limited to: • Hard Hat • Ear Plugs or Attenuator • Safety Shoes • Dust Mask or Respirator • Gloves CRITERIA FOR ADVANCEMENT: 1. Workmanship in piping system fitups and preps 2. Knowledge of workmanship requirements IAW Mil- Stds and shipyard rules 3. Knowledge of company policies 4. Knowledge of safety requirements including PPE 5. Good attendance 6. Ability to work effectively with supervision 7. Motivation and dedication to company EOE/M/F/Disability/Vet EOE/M/F/Disability/Vet If a reasonable accommodation is needed for the interview process, please contact Barbara Nicholas at (757) 577-5345 or by email at bnicholas@ecrfab.com. It is the policy of the Company to provide equal employment opportunities to all employees and employment applicants without regard to unlawful considerations of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We Are an Equal Opportunity Employer
See More Details >>Embarking on a career as a pipefitter in Jacksonville, FL, typically begins with an apprenticeship, blending hands-on experience with classroom learning, allowing individuals to gain practical skills while earning a wage. Apprenticeships generally span four to five years, requiring extensive on-the-job training under seasoned professionals. According to the Bureau of Labor Statistics, there are approximately 89,141 pipefitters nationwide, with a median annual wage of $61,550, translating to about $1,183 per week. In Jacksonville, the average weekly wage for pipefitters is $1,170, with an annual overtime average of $2,800. Trade schools, unions, and platforms like Guild offer apprenticeship opportunities, leading to a lucrative career with the potential to earn over $100,000 annually for experienced professionals.
