C.A. Jones is now hiring pipefitters for long term, national defense work underway at Marinette Marine in Marinette, Wisconsin. Don't miss this exciting opportunity. Per Diem is available for qualified non-local personnel. Applicants must be able to pass drug screening prior to job start. Applicants should have a minimum of (10) years of work experience as a pipefitter in a shipyard / marine industrial environment. Must be willing to work ANY shift. Position Summary: This position is responsible for using ratchets, sockets, combination wrenches, nut wrenches, and various other hand tools to install pipe fittings for testing and flushing of pipe systems. Responsible for using a hand torch for cutting and brazing. Running hoses from flushing equipment to piping systems on the ship. Fix threading of fittings and braze pipe fittings and pipe valves. A pipefitter is responsible, with some supervision, for installing, removing, repairing, targeting, laying out, fabricating, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. New install and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The pipefitter is also responsible for providing direction to helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the Fincantieri. Must be able to pass welder workmanship training with a 75% or higher. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Must have a working knowledge of Silver Brazing theory. (MT Braze in both B-1 and B-2) • Must be able to certify in: 0900-LP-001-7000 • Must be able to interpret specifications and Navy/MSC/ABS standard items and manuals. • Must be able to certify in and use Lok-ring, Swage-Lok, Pyplok, and Viega pipe fittings Skills: • Know how mate mechanical pipefittings including unions, flanges, and pipe valves using various hand tools • Must be able to read and understand functional piping system drawings • Must be able to breakdown piping systems, run hoses, install test fittings, and test piping systems with oil and water in accordance to FMM 2C Test procedures • Must have thorough understanding of Navy Ship pipe systems operation • Perform FMM 4C operational tests according to procedures • Must be able to trouble-shoot operational pipe systems issues as they arise We Offer: • Long Term work opportunity • Per Diem for qualified non-locals - $165.00 per work day • Competitive Pay Rate - $43 per /hr • Overtime (on an as-needed basis only) • Holiday bonus pay • Vacation bonus pay • Medical / Dental Insurance • 401K If you meet the minimum requirements listed above and are interested please forward your resume via the Roaddogjobs link!
See More Details >>Responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing of marine piping systems including auxiliary salt water, fire main, potable water, hydraulic, compressed air, fuel oil, lube oil, engine exhaust etc. in accordance with work item specifications, military standards and drawings and other regulatory body standards such as ABS, Military Sealift Command, etc. Repair, fabrication, and construction include the use of various shop equipment and tooling such as table saws, pipe threading machines, bending machines, drill presses, and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks. Requirements: • Must be able to comprehend instructions, drawings, and general correspondence. • Must have a comprehensive knowledge of ship terminology and ship compartment naming convention. • Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals. • Measure or template pipe for fabrication. • Blank systems in accordance with applicable safety standards. • Fit up new pipe using the proper fit up type in accordance with specifications. • Ensure a strain free fit-up to pumps or other connecting equipment. • Blank tanks and accomplish boundary air tests. • Accomplish or verify Lock-out Tag-out requirements before commencing. • Inspect work for defects before turning the job over to correct fit-ups as required. Confer with supervision before correcting deficiencies. • Must have a thorough knowledge of experience with joint fit-up. • Must have a comprehensive knowledge of Silver Brazing theory. • Must be able to certify in: • MT Braze (B-1) • MT Braze (B-2) • Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting. • Must be able to add, subtract, multiply, and divide whole numbers, fractions, and must understand the US customary and metric measurement systems. • Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc. • Must be 18 years of age or older. • Must be a U.S. person. • Must be able to work at heights. • Must be able to work in tanks and confined spaces for pipe installation and testing. • Must be able to work in inclement weather conditions. • Must be available to work A (5am-3pm Mon. - Thru.), B (4pm - 2am Mon. - Thru.), and C (5pm - 5am Fri. - Sun.) shifts. • Must be able to lift 50lbs
See More Details >>Chipton-Ross is seeking a Pipe Fitter for a contract opportunity in Marinette, WI. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Ability to follow directions under intermittent supervision Experience cutting, threading, or bending pipes to specifications Ability to lay out full-scale drawings of pipe systems, supports, or related equipment based on blueprints Skill in assembling or securing pipes, tubes, fittings, or related equipment by welding, brazing, or threading joints Ability to measure and mark pipes for cutting or threading Experience inspecting, examining, or testing installed systems or pipelines using pressure gauges, hydrostatic testing, or other methods Ability to plan pipe system layouts, installation, or repair according to specifications Skill in attaching pipes to walls, structures, or fixtures Ability to modify, clean, or maintain pipe systems, units, fittings, or related machinery Skill in cutting or boring holes in structures for pipe system installation Ability to install automatic controls to regulate pipe systems Experience shutting off steam, water, or other gases or liquids from pipe sections using valve keys or wrenches Ability to remove and replace worn components and operate motorized pumps to remove water Strong troubleshooting skills for diagnosing and solving problems with equipment Commitment to proper storage and maintenance of equipment Willingness to engage in highly energetic pursuits on the waterfront Commitment to maintaining quality, environmental, health, and safety standards Ability to abide by all organizational policies and procedures POSITION RESPONSIBILITIES: Perform pipefitting work on equipment, ship interiors, ship exteriors, and shipyard buildings Maintain, troubleshoot, and repair pipe systems and related equipment Follow proper installation and testing procedures to ensure system integrity and safety Document inspections and repairs following company standards Support shipyard operations and waterfront activities as needed Ensure proper and safe use of all tools and equipment Participate in required safety and operational training sessions REQUIRED EDUCATION: Accredited HSD/GED WORK HOURS: Full-Time Standard weekday schedule Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.
See More Details >>Becoming a pipefitter in Marinette, WI typically involves an apprenticeship that blends hands-on experience with classroom instruction, allowing individuals to gain practical skills while earning. Apprenticeships generally span four to five years, requiring extensive training under experienced professionals. According to the Bureau of Labor Statistics, there are 458 pipefitters in Wisconsin, with a median weekly wage of $831.25 in Marinette. The industry projects a 6% job growth from 2022 to 2032. Aspiring pipefitters can find apprenticeship opportunities through trade schools, unions, and platforms like Guild, leading to a career with strong earning potential, often exceeding $43,000 annually for experienced professionals.
