Brown & Root Industrial Services - JobID: 500#######300 [Maintenance Mechanic] As a Pipefitter at Brown & Root, you'll: Lay out, fabricate, assemble, install and maintain piping systems, pipe ..Hiring Immediately >>
See More Details >>• **THIS IS MAINTENANCE***NO PER DIEM*** Position Summary An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights • Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. • Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. • Must have good leadership and communication skills. • Must be have experience on an industrial construction project. Position Responsibilities • Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. • Identify all tools required for tasks. • Identify safety risks and the precautions required to eliminate those risks. • Prepare, fabricate, install, and fit pipe to specifications. • Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. • Perform test to ensure the quality of the pipe and the piping systems. • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position • This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications • Demonstrated industrial construction/maintenance history experience. • Ability to read prints and construction drawings. • Ability to read and interpret technical manuals and manufacturers manuals and instructions. • Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. • Must have 4+ years experience with the pipe fitting processes. • Good problem-solving abilities. • Good aptitude and manual dexterity. • Good reading comprehension. • Ability to work with others - team player. • Ability to work independently - minimal supervision. • Good communication skills with co-workers and supervisors. • Commitment to Zachry values and safety rules and regulations. Preferred Qualifications • Zachry ROF'ed employee. • Former Zachry Employee. • NCCER Certification as an Industrial Pipe Fitter • Formal/technical education Required Tools • 1 - Metal Tool Box with Lock • 2 - Torpedo Magnetic Level • 1 - 25' Tape Measure • 1 - 5 Gallon Plastic Bucket • 2 - 12" x 24" Framing Square • 1 - String Level • 1 - 8" Crescent Wrench • 1 - 14" Pipe Wrench • 1 - 24" Pipe Wrench • 1 - Pipefitter's Blue Book • 1 - 420 Channel Locks • 1 - Torch Lighter (Striker) • 1 - Chalk Line • 1 - Set of Allen Wrenches • 1 - Line Up Bar • 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") • 1 - Screwdriver (Flat) • 1 - Set of Tip Cleaners • 1 - Pair of Leather Gloves • 1 - 24" Level • 1 - 16' Tape Measure • 1 - Pair of Cutting Goggles • 1 - Center Finder • 1 - 4" Wraparound • 1 - 12" Crescent Wrench • 1 - 18" Pipe Wrench • 1 - Center Punch • 1 - Wire Cutters • 1 - Plumb Bob • 1 - Set Blinding Wedges - Small • 1 - Hacksaw • 1 - 3lb to 4lb Ball Peen Hammer • 1 - Phillips Screwdriver • 1 - Combination Set - Tri- Square, Protractor, and Center Finder • 1 - 3/8 Ratchet Drive with 3/8" to 1" set • 1 - Construction Calculator • 1 - Rain Suit • 1 - Rubber boots Physical Requirements • Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. • Will talk and hear to communicate. • Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. • Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. • May be required to lift, carry and move up to 50lbs. • Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. • Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. • Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. • Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer
See More Details >>Total Safety is seeking Boilermakers (NCCER preferred) with Deluge Systems/Bolt Up/Screw Pipe experience who can provide maintenance services, installation of pipe, fittings, valves, and piping systems, repairs and inspects all boiler components along with working the towers and exchangers in industrial plants and/or industrial settings to keep them in good working order. Total Safety is the world's premier provider of integrated safety and compliance services and the products necessary to support them, including gas detection, respiratory protection, safety training, fire protection, compliance and inspection, industrial hygiene, onsite emergency medical treatment/paramedics, communications systems, engineered systems design, and materials management. Our Core Values are People, Safety & Wellbeing, Accountability, Responsibility, Empowerment, Honesty, Transparency, and Integrity. Essential Duties: Experience in maintaining job site documentation, i.e., job time sheets, and building drawings. Ability to read and interpret blueprints, diagrams, and specifications used in installation activities. Proficient in hand tool, power tool, and pipe fitting experience. Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to forty feet, working in ducts, crawl spaces, above ceilings, etc. Ability to work alternative shifts or weekends and to travel upon request to meet customer installation schedule. Tighten and loosen bolts on flange connections and manways as per ISO drawings and work plan. Assist with installation/removal of blinds as needed for pressure testing purposes. Possess skilled knowledge of pipefittings, bolts, valves, etc. as required. Assemble and secure pipes, tubes, fittings, and related equipment according to specifications. Use impact wrenches, combination wrenches, and line up pins to install valves and piping spools. Performs other related duties as required and assigned. Skills and Experience: 3+ year’s boilermaker experience in the fire protection, petrochemical, or oil refinery related industry preferred. Ability to carry and move equipment and tools weighing up to forty pounds. Valid driver's license from state of residence and valid proof of vehicle insurance, satisfactory driving record required. Must be able to pass a comprehensive background and drug/alcohol screening. The ability to successfully pass plant security, drug screen (to include UA, hair follicle & breathalyzer). Working Environment: Industrial or shop environment. Frequently exposed to wet, humid, outside weather conditions and vibration. Works in some customer environments during later part of training. May be exposed to high pressure, chemicals, gas releases, or fire. The noise level in work environment is usually moderate. Educational Requirements: High School Diploma or equivalent education and/or experience. NCCER in Pipefitting/Boilermaker (preferred) Current TWIC Total Safety and its subsidiaries afford equal opportunity in employment to all individuals regardless of race, color, religion, sex, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law. Total Safety is an Equal Opportunity Employer. #LI-KB Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
See More Details >>Embarking on a career as a pipefitter in Pasadena, TX typically begins with an apprenticeship, blending hands-on experience with structured learning, enabling individuals to earn while they learn. Apprenticeships span approximately four to five years, demanding extensive training under seasoned professionals. According to the U.S. Bureau of Labor Statistics, there are currently 89,141 pipefitters nationwide, with a robust job growth projection of 6% from 2022 to 2032. In Pasadena, TX, pipefitter apprentices earn an average of $810 per week, with experienced professionals often surpassing an annual income of $50,000. Vocational schools, trade unions, and specialized platforms facilitate apprenticeship opportunities, leading to a lucrative career with significant earning potential.
