Overview Performs a variety of functions such as installation, maintenance, and repair on all electrical systems of any baggage handling, passenger boarding bridges, facilities and related equipment. Responsibilities • Performs maintenance and repair of baggage handling systems, passenger boarding bridges and related equipment. • Executes complex maintenance assignments involving but not limited to automotive, electrical, systems and other related trade skill sets. • Conducts daily and periodic shift inspections, cleaning, and diagnostics of electrical system components based on an established scheduled preventive maintenance program. • Troubleshoots and repair all control system and electrical failures by applying comprehensive technical knowledge to solve problems by interpreting manufacturer manuals or similar documents. • Run conduit, change motors, repair circuits, rewire, repair wiring, etc. as needed. • Perform preventive maintenance on electrical components based on an established scheduled preventive maintenance program to include, but not limited to, motors, clutches, brakes, bearings, drive belts, drive shafts, pulleys, gearboxes (speed reducers), and conveyor belting. • Complete Pm Checklist in accordance with established procedures, document accordingly in applicable computer program. • Remove and replace plug-in type boards and components. Align, replace, and clear photocells. • Makes repairs of connectors, wiring and fuses on-site, and cleans and performs diagnostic routines of electrical and control system components. • Maintain work orders in applicable computer program. • Works in tight and/or high spaces utilizing appropriate PPE and fall protection equipment. • Follows and complies with all company and federally established policies and procedures • Utilizes a computer to perform a variety of communications, training and administrative processes. • Completes forms connected with work assignments according to established procedures. • Completes all safety training as assigned by the Company. • Compliance with all ELS safety programs, policies and procedures. • Perform additional duties/assignments that may be required by management from time to time. Qualifications • High School Graduate or General Education Degree (GED) • Must possess a Class A Journeyman Electrical License for the state of Minnesota. • Must have own set of hand tools common to the trade. • Ability to work a non-traditional schedule including weekends and holidays. PREFERRED QUALIFICATIONS: • Knowledge of airport operations and maintenance. • Knowledge of commonly used concepts, practices and procedures related to equipment repair. • Knowledge of general workplace safety requirements and procedures. • 4+ years of mechanical work experience or equivalent technical schooling. • 4+ years of electrical work experience or equivalent technical schooling. • Knowledge of conveyor systems and/or passenger boarding bridges. ADDITIONAL SKILLS AND KNOWLEDGE: • Ability to accept responsibility and account for his/her actions. • Ability to use thinking and reasoning to solve a problem. • Ability to take care of customer needs while following company procedures. • Ability to demonstrate conduct conforming to a set of values and accepted standards. • Ability to focus on a goal and obtain a pre-determined result. • Ability to formulate a sound decision using the available information. • Ability to effectively build relationships with customers and co-workers. • Possess the trait of being organized or following a systematic method of performing a task • Ability to work with people regardless of race, gender, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, veteran status, medical condition or job type. • Ability to get along well with a variety of personalities and individuals. • Ability to obtain the proper resources to complete job assignment. • Ability to identify and correct conditions that affect employee safety. • Ability to be truthful and be seen as credible in the workplace. • Ability to communicate clearly and concisely, both orally and concisely. • Ability to work under pressure with time constraints • Ability to complete assigned training in a timely manner. Computer Skills: Basic computer knowledge, ability to log in, retrieve and answer emails, and take training. Other Requirements: • Must be able to read, write, speak and understand English. • Must be able obtain and maintain an Airport Security badge • Must have and maintain a valid driver's license and be insurable under the Company's insurance policy • Must be able to comply with the ELS Drug and Alcohol policy. PHYSICAL DEMANDS: The physical demands of this position vary by day and are not based solely on a single workday. Physical Demands Lift/Carry Stand F (Frequently) Walk F (Frequently) Sit O (Occasionally) Handling / Fingering F (Frequently) Reach Outward O (Occasionally) Reach Above Shoulder O (Occasionally) Climb/Balance O (Occasionally) Crawl O (Occasionally) Squat or Stoop O (Occasionally) Bend or Kneel O (Occasionally) 10 lbs or less F (Frequently) 11-20 lbs F (Frequently) 21-50 lbs O (Occasionally) 51+ I (Infrequently) Push/Pull 10 lbs or less F (Frequently) 11-20 lbs F (Frequently) 21-50 lbs O (Occasionally) 51+ lbs I (Infrequently) Drive O (Occasionally) N (Not Applicable) Activity is not applicable to this occupation. I (Infrequently) O (Occasionally) Occupation requires this activity less than 5% of the time Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements: Vision (Near, Distance), Hearing WORK ENVIRONMENT Will work in a mechanics shop, in conditions that may contain dust, dirt, moving machinery, temperature changes, heights and continual noise that is below OSHA's action level. Must have the ability to work outside for extended periods, in extreme weather conditions. PPE is required. ELS STATEMENT: Elite Line Services (ELS) is an Affirmative Action/Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, gender identity, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, veteran status or medical condition. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact elshr@elitelineservices.com. This email address is reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a response.
See More Details >>Description Summary: This is a full-time, non-exempt position. Responsibilities include maintaining electrical safety and system reliability. Position also requires work maintaining mechanical and pipe systems, and other maintenance related tasks. $28-$35/hr Essential Job Responsibilities: Maintains all electrical systems. Responsible for system reliability. Installs three-phase electrical and motor circuits. Performs a variety of skilled and semi-skilled work. Includes general construction, installation, and maintenance of electrical equipment, industrial motor and control equipment, devices and services in a food manufacturing environment. Performs preventive inspections of industrial electrical motor and control systems to ensure safety and performance. Troubleshoots motors and electrical circuits. On call for emergency electrical repairs for a 24/7 food manufacturing facility. Position requires work on one weekend day per week. Other Duties: Maintains mechanical systems including pumps, dryers and dewatering equipment. Maintains PVC pipe systems. Submits requisitions for electrical supplies, materials, tools and equipment. Maintains general inventory of spare parts to ensure that repairs are made immediately. Assists with building maintenance, general maintenance and construction activities. Participates as a member of the Safety Committee. Perform QC functions as trained by QC personnel including but not limited to sanitation signoff. Perform other duties that may be assigned. Physical Demands: This position requires heavy physical activity including walking, climbing, reaching, bending, twisting, kneeling and stooping. May be required to lift up to 60 pounds on an occasional basis. Working Conditions: A majority of the work is performed outside, in a sunny, warm climate, and inside in production areas which can be humid. Protection from sun exposure may be required. Minimum Qualifications: High School diploma or GED. Licensed as a Journeyman Industrial Electrician in Hawaii is required. Working knowledge of electrical safety, National Electrical Code, materials, tools and equipment used in the electrical trade. Reads and comprehends technical drawings and instructions. Additional skills in one or more of the following trades: industrial mechanic, building maintenance, welding, carpentry or related trades. Proficiency with PC-based computer applications including Microsoft Word, Excel, and Outlook. Excellent organizational and administrative skills. Able to work independently as well as part of a team. Strong verbal and written communication skills. Good problem-solving skills. Able to perform the essential functions of the position with or without reasonable accommodation. Management reserves the right to change this job with or without notice.
See More Details >>Electrician / Maintenance Mechanic (102767) Our client is seeking a full-time Electrician/Maintenance Mechanic. Responsibilities in this role include maintaining electrical systems, performing inspections, troubleshooting motors and electrical circuits, maintaining pipe systems and assisting with building maintenance. If you have your Journeyman Industrial Electrician license, we want to hear from you. Apply today to be immediately considered. Hours Full-time, 6:00am-2:30pm (occasional weekends and on call as needed) Location Kailua-Kona, Big Island Pay $28 to $35 an hour, Depending on Experience Responsibilities • Maintain all electrical systems. • Install three-phase electrical and motor circuits. • Perform preventative inspections. • Troubleshoot motors and electrical circuits. • Maintain PVC pipe systems. • Assist with building maintenance. Qualifications • Journeyman Industrial Electrician license is required. • Knowledgeable with computers and working knowledge of Microsoft Office. • Working knowledge of electrical safety and National Electrical Code. • Valid driver's license required. • Must be able to lift up to 60lbs.
See More Details >>Becoming an electrician in Kailua, HI, typically starts with an apprenticeship, combining hands-on experience with classroom learning, allowing individuals to earn while they learn. Apprenticeships last about four to five years, requiring many hours of training under licensed professionals. The average wage for electricians in Kailua is $1,300 per week, with an annual overtime average of $46,500. With a population of approximately 215,294 and an employment population ratio of 0.00327, the demand for skilled electricians is steady, offering a promising career path with strong earning potential.
