Position Overview The Machinist runs a variety of Computer Numerical Control (CNC) and Programmable Logic Controller (PLC) based machines within a high-volume production machining process while adhering to quality operating system requirements & makes adjustments to machines as per the control plan guidelines to ensure product quality. Schedule: Monday – Thursday 6:00 AM - 4:30 PM Pay: $24.15 Per Hour 6-Month Progression: $25.73 12-Month Progression: $27.30 18-Month Progression: $29.40 24-Month Progression: $31.76 Responsibilities • Monitors computer screens and interprets data to determine that process is running according to control plan • Responds to machine faults and takes corrective action • Troubleshoots work-related problems and makes repairs on the spot as needed • Documents rework and scrap using the non-conforming material procedure • Observes tool wear detection and makes tooling changes when required • Works in teams to identify and implement process improvements and error proofing procedures • Instructs and certifies other machine technicians to ensure compliance with quality operating standards • Verifies compliance with process instructions and control plans, reports deviations to Group Leader • Enters defect data into the computer • Verifies gage calibration requirements for engine components • Anticipates potential production problems by proactively reviewing equipment condition and initiating corrective action when needed. • Monitors special characteristics to ensure compliance with control plan requirements • Works safely to prevent on-the-job injuries and complies with all safety and environmental requirements • Uses computers to interpret and evaluate production data Minimum Requirements • High School Diploma or GED equivalent Additional Requirements • Qualified candidates, excluding current International Motors employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. International Motors does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status) • Must be willing to work any shift • Must achieve an acceptable score on a situational/skills based interview • Physical requirements (ability to the following for up to 10 hours per shift): • Walk, sit, stand • Lift, carry, push or pull up to 20 pounds • Head/neck movement • Reach outward or above the shoulder • Exposure to constant and intermittent noise, fumes, smoke and gases, solvents, paint, grease and oils, radiant energy, and slippery surfaces Desired Skills • Positive attitude, ethics and International values which support our company’s values, and a health, high performance culture • Technical College certificate in Machine Tool Technology or related discipline • Experience working in a high-performance team environment • Computer literate, Customer focused, Has a drive for results • Metal cutting machining experience • Experience reading manufacturing drawings including GD&T • Experience operating production machinery Benefits and Compensation We provide a competitive total rewards package which ensures job satisfaction both on and off the job. We offer market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. You can learn more about International’s comprehensive benefits package at https://careers.international.com/#benefits. Company Overview ABOUT TRATON With its brands Scania, MAN, International, and Volkswagen Truck & Bus, TRATON SE is the parent and holding company of the TRATON GROUP and one of the world’s leading commercial vehicle manufacturers. The Group’s product portfolio comprises trucks, buses, and light-duty commercial vehicles. “Transforming Transportation Together. For a sustainable world.”: this intention underlines the Company’s ambition to have a lasting and sustainable impact on the commercial vehicle business and on the Group’s commercial growth. ABOUT INTERNATIONAL From a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International® trucks and engines and IC Bus® school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite® aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit www.International.com. • International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah. EEO Statement International is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email HUB@Navistar.com to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.
See More Details >>Job description Overview AMT is seeking a skilled CNC Machinist to join our dynamic team. The ideal candidate will be responsible for operating CNC machines to fabricate precision parts and components according to customer specifications. This role requires a strong understanding of machining processes, attention to detail, and the ability to work in a fast-paced environment. If you have experience with various machining techniques and are committed to quality and efficiency, AMT encourages you to apply. Job Requirements • Previous experience with performing set-ups and operating CNC machines and lathes with precision and accuracy; preferably HAAS, FANUC, horizontal and vertical mills • Understanding of GD&T and possesses the ability to perform quality checks on own parts produced using measurement tools such as calipers, gauges, dial-indicators, and micrometers • The capability to read and interpret blueprint/engineering drawings is imperative in order to properly fabricate parts to customer specifications and quality standards • Utilize CAM programming software for efficient machine operation • Flexibility to work independently or in a fast-paced, team-oriented environment • Good communication skills • Maintain a clean and organized workspace in compliance with safety regulations • Expected to supply own hand tools and toolbox • Must be able to lift, carry, or relocate materials or parts weighing up to 50 lbs Qualifications • Proven experience as a CNC Machinist or similar role in a manufacturing environment • Proficiency in operating milling machines, lathes, and other CNC equipment • Familiarity with Fanuc controls and programming • Knowledge of GD&T (Geometric Dimensioning and Tolerancing) standards • Experience with SolidWorks for part design is a plus • Ability to read technical drawings and schematics effectively • Strong problem-solving skills and attention to detail • Commitment to continuous improvement Experience • At least 5 years experience in CNC operation • Experience in the DoD manufacturing environment is a plus • High school or equivalent • Please do not apply if you do not meet the minimum expectations for relevant experience MUST BE A US CITIZEN This is a fulltime, in person position Please note, pay rate can be negotiated, but is considered based on experience Ability to relocate to Madison, AL if applicable Job Type: Full-time Pay: From $25.00-$30.00 per hour Expected hours: 40 per week Benefits: • 401(k) • 401(k) matching • Dental insurance • Flexible spending account • Health insurance • Paid time off • Tuition reimbursement • Vision insurance
See More Details >>Tin-Mar, Inc. is in need of a CNC programmer who is very familiar with Mastercam/Surfcam programming software. The position creates CNC programs for the manufacture of mid to high complexity aerospace components on 3, 4 and 5 axis CNC equipment. This candidate will read drawings and solid models in order to calculate dimensions, tool selection and machine speeds. This is a full time job offer. The position requires a minimum of 3 years experience as a programmer. Job Type: Full-time Pay: $32.50 - $50.00 per hour Benefits: • 401(k) • 401(k) matching • Health insurance • Paid time off Schedule: • 10 hour shift Work Location: In person
See More Details >>Entering the machining trade in Huntsville, AL, typically begins with specialized education and training, such as apprenticeship programs that last 4-5 years and combine hands-on experience with classroom learning. The U.S. Bureau of Labor Statistics reports approximately 288,789 machinists nationwide, with a median annual wage of $50,840, and projects little to no change in employment from 2023 to 2033. Apprentices in Huntsville earn an average of $1,875 per month, with experienced professionals often exceeding $80,640 annually. Educational pathways include apprenticeship programs, postsecondary education, and on-the-job training, leading to a career with strong earning potential and opportunities for advancement in this essential manufacturing field.
